Magura MT C5 rear disc brake 1800mm TOP-DEAL
Product information "MT C5 rear disc brake 1800mm TOP-DEAL"
The Magura MT C5 disc brake combines powerful 4-piston brake performance with high everyday suitability for city, all-road and light MTB use.
Magura MT C5 - comfort brake for city and trekking
Thanks to optimised ergonomics, a clearly defined pressure point and low manual force, it offers reliable control and comfortable modulation at all times. The newly developed axial sensor with enlarged reservoir reduces air formation in the system and ensures reliable function over the long term. In combination with quiet SPORT pads and E-bike-optimised components, the MT C5 impresses with low maintenance and consistent braking performance.
Features - Magura MT C5 3-Finger Carbotecture®
Powerful 4-piston brake with high stability
Comfortable ergonomics with low effort and precise modulation
Enlarged reservoir for long-lasting and low-maintenance performance
Optimised for E-bikes with quiet SPORT pads and sturdy MDR brake discs
Product features
Range of use: City / Allroad
Handlebar mounting: Right
Principle: Fully hydraulic four-piston fixed calliper
Brake system: Open, with reservoir
Lever type: 3-finger lever
Brake caliper mounting according to internal standard (IS2000): Yes, adapter
Postmount brake caliper mounting (PM): Yes, direct mounting
Pad adjustment: Automatic
Brake fluid: MAGURA Royal Blood mineral oil
Brake hose: MAGURA Disc Tube
Reach adjust: Yes (tool-free)
OPD (one-piece brake caliper): Yes
BAT (individual pressure point adjustment): No
Two-piece brake lever clamp: Yes
Flip-flop brake lever: No
Cable length: 1800 mm
Material
Brake lever: Carbotecture
Brake lever: Carbotecture
Brake caliper: Aluminum
Scope of delivery
1 x Magura MT C5 3-Finger Carbotecture disc brake (no box packaging)
1 pair brake pads
1 x Insertpin
1 x Olive
2 x fixing screw
1 x transport lock
Attention: The brake hose is filled and has been clamped off and cut by the manufacturer near the brake lever using two metal clamps. Before using the brake for the first time, the hose must be shortened at these points and reconnected. The necessary pin and olive set is included in the package.
Brake disk and adapter not included!
For suitable brake disk>CLICK HERE<
For suitable adapter>CLICK HERE<
Technology
What is Carbotecture?
In the sensitive motorcycle and bicycle industry, MAGURA stands for the highest quality, reliability and sophisticated components thanks to its own production in Germany. With the development of special materials and processes such as Carbotecture® and Carbolay®, we have made designs and constructions possible that no other manufacturer can realize. At our production and assembly sites in Hülben and Hengen, in close proximity to the original factory in Bad Urach, we have established an extremely effective quality assurance system. Lightweight, very stable and at the same time absolutely reliable function over many years - for our MAGURA brakes we realize these aspects with several plastics developed in-house. To call them plastic would be a real insult.
We see ourselves as the architects of our materials: this is how our basic material Carbotecture®, a combination of carbon and architecture, came about. A mixture of high-tech polymers and carbon or glass fibers is transformed into a plastic granulate in several complex processes. During the manufacturing process from this granulate to the finished component, the carbon fibers are optimally aligned to the load requirements. With this Carboflow process, any desired shape can be created from the granulate by injection molding. Compared to the classic lightweight material aluminum, our Carbotecture® offers significant advantages: With identical tensile and breaking strength to aluminum, Carbotecture® is 50% lighter, so it only weighs half as much! Carbotecture® is a dream material, but only thanks to our highly developed machines and processes: smooth surfaces in all complex shapes are possible. This is how our stiff yet lightweight brake levers are created. BMW also relies on the special properties of Carbotecture® for its motorcycles, and the clutch master cylinder of the BMW GS is also made from this material.
In our Carbotecture SL® material, we increase this resistance while simultaneously reducing weight by incorporating medium-length carbon fibers into the polyamides instead of short ones. The brake levers of our award-winning MT disc brake series are made of Carbotecture® and Carbotecture SL®.
Another material is Carbolay®, which is produced in a fully automated process. The carbon fibers are positioned according to load using a textile process and impregnated with resin fully automatically in a mould. This allows brake levers to be produced in Carbolay® in an attractive and ergonomically optimized form: Perfect finger force transmission thanks to high rigidity combined with low component weight.
- Manufacturer number: 2006700
Stuttgarter Straße 48
72574 Bad Urach
Deutschland
[email protected]
https://www.magura.com
Magura MT C5 rear disc brake 1800mm TOP-DEAL
The Magura MT C5 disc brake combines powerful 4-piston brake performance with high everyday suitability for city, all-road and light MTB use.
Magura MT C5 - comfort brake for city and trekking
Thanks to optimised ergonomics, a clearly defined pressure point and low manual force, it offers reliable control and comfortable modulation at all times. The newly developed axial sensor with enlarged reservoir reduces air formation in the system and ensures reliable function over the long term. In combination with quiet SPORT pads and E-bike-optimised components, the MT C5 impresses with low maintenance and consistent braking performance.
Features - Magura MT C5 3-Finger Carbotecture®
Powerful 4-piston brake with high stability
Comfortable ergonomics with low effort and precise modulation
Enlarged reservoir for long-lasting and low-maintenance performance
Optimised for E-bikes with quiet SPORT pads and sturdy MDR brake discs
Product features
Range of use: City / Allroad
Handlebar mounting: Right
Principle: Fully hydraulic four-piston fixed calliper
Brake system: Open, with reservoir
Lever type: 3-finger lever
Brake caliper mounting according to internal standard (IS2000): Yes, adapter
Postmount brake caliper mounting (PM): Yes, direct mounting
Pad adjustment: Automatic
Brake fluid: MAGURA Royal Blood mineral oil
Brake hose: MAGURA Disc Tube
Reach adjust: Yes (tool-free)
OPD (one-piece brake caliper): Yes
BAT (individual pressure point adjustment): No
Two-piece brake lever clamp: Yes
Flip-flop brake lever: No
Cable length: 1800 mm
Material
Brake lever: Carbotecture
Brake lever: Carbotecture
Brake caliper: Aluminum
Scope of delivery
1 x Magura MT C5 3-Finger Carbotecture disc brake (no box packaging)
1 pair brake pads
1 x Insertpin
1 x Olive
2 x fixing screw
1 x transport lock
Attention: The brake hose is filled and has been clamped off and cut by the manufacturer near the brake lever using two metal clamps. Before using the brake for the first time, the hose must be shortened at these points and reconnected. The necessary pin and olive set is included in the package.
Brake disk and adapter not included!
For suitable brake disk>CLICK HERE<
For suitable adapter>CLICK HERE<
Technology
What is Carbotecture?
In the sensitive motorcycle and bicycle industry, MAGURA stands for the highest quality, reliability and sophisticated components thanks to its own production in Germany. With the development of special materials and processes such as Carbotecture® and Carbolay®, we have made designs and constructions possible that no other manufacturer can realize. At our production and assembly sites in Hülben and Hengen, in close proximity to the original factory in Bad Urach, we have established an extremely effective quality assurance system. Lightweight, very stable and at the same time absolutely reliable function over many years - for our MAGURA brakes we realize these aspects with several plastics developed in-house. To call them plastic would be a real insult.
We see ourselves as the architects of our materials: this is how our basic material Carbotecture®, a combination of carbon and architecture, came about. A mixture of high-tech polymers and carbon or glass fibers is transformed into a plastic granulate in several complex processes. During the manufacturing process from this granulate to the finished component, the carbon fibers are optimally aligned to the load requirements. With this Carboflow process, any desired shape can be created from the granulate by injection molding. Compared to the classic lightweight material aluminum, our Carbotecture® offers significant advantages: With identical tensile and breaking strength to aluminum, Carbotecture® is 50% lighter, so it only weighs half as much! Carbotecture® is a dream material, but only thanks to our highly developed machines and processes: smooth surfaces in all complex shapes are possible. This is how our stiff yet lightweight brake levers are created. BMW also relies on the special properties of Carbotecture® for its motorcycles, and the clutch master cylinder of the BMW GS is also made from this material.
In our Carbotecture SL® material, we increase this resistance while simultaneously reducing weight by incorporating medium-length carbon fibers into the polyamides instead of short ones. The brake levers of our award-winning MT disc brake series are made of Carbotecture® and Carbotecture SL®.
Another material is Carbolay®, which is produced in a fully automated process. The carbon fibers are positioned according to load using a textile process and impregnated with resin fully automatically in a mould. This allows brake levers to be produced in Carbolay® in an attractive and ergonomically optimized form: Perfect finger force transmission thanks to high rigidity combined with low component weight.
- Manufacturer number: 2006700
Stuttgarter Straße 48
72574 Bad Urach
Deutschland
[email protected]
https://www.magura.com
Material
neleCustomerReviews.detail.tabReview.info
Last viewed