Flyer G1 Uproc EVO:X 8.70 Race FS

Developed to win races - Bosch Performance Line CX Race

The impressive racing character of the Performance Line CX Race is ideal for the toughest eMTB races in the world. The Drive Unit impresses on the steepest and most technically demanding uphill and downhill trails as well as on long stages with many meters of elevation gain. Combined with the exclusive Race mode, it enables direct acceleration at the exit of corners, the fastest possible acceleration and riding. The Performance Line CX Race is the perfect choice for professional eMTB athletes and ambitious sportspeople.

#TheNewFast - Performance Line CX Race Limited Edition

Features at a glance

Exclusive Race mode
The riding mode specially developed for eMTB racing impresses with energetic, direct support - with 400 percent of your pedal power.

85 Newton meters
Extremely fast acceleration after tight bends and obstacles gives you the decisive competitive edge.

Powerful design
The Performance Line CX Race in graphite gray impresses with its sporty, confident look.

Hill start assist
Start off more easily on steep terrain: put your foot on the pedal and hold down the minus button.

Functions and details

The best of both worlds
EMTB+ mode combines the precise controllability of eMTB mode with the full power of Race mode and bridges the gap between the two modes.

Exclusive Race mode
Race mode has been specially developed for use in eMTB races and is available exclusively for the Performance Line CX Race. The riding mode gets you up to top speed quickly and supports you with its full power up to maximum speed - for the decisive seconds in the battle for the best time. The Extended Boost known from eMTB mode is also available in Race mode - but with an even longer boost. It is ideal for quickly overcoming large boulders and complex root passages. A precise riding technique is required to control the energetic response and power of Race mode. It was developed with the expertise of successful eBike athletes.

85 Newton meters of powerful acceleration
The maximum torque of the Performance Line CX Race of up to 85 Newton meters enables rapid acceleration - from a standing start, after extremely demanding sections and obstacles, tight bends or hairpin bends. The power of pedaling is immediately converted into propulsion. Even at high pedalling frequencies of more than 120 revolutions per minute, the powerful motor provides powerful support. Sporty riding over long distances and fast sprints are possible - ideal conditions for best times on demanding routes.

Low weight and compact design
The Performance Line CX Race weighs just 2.7 kg. The low weight contributes to a lower overall weight of the eBike - ideal for more control uphill and downhill, fun on jumps and easier negotiation of carrying and pushing passages. The integration into a sporty, slim frame geometry optimizes handling and ensures agile handling.

Sporty design
The housing of the Performance Line CX Race has a high-quality graphite grey finish and stands out visually from other drive units thanks to its logo and accent colors. The slim design and the special surface finish underline the robust, sporty and strong character of the drive unit.

Hill hold on sporty routes
The Hill Hold function of the smart push assist prevents your eBike from rolling back unintentionally when pushing on extremely steep slopes and impassable passages. This means you can push your eMTB much more easily and make faster progress on strenuous and tedious climbs on foot. In extremely tight and steep bends, you can use Hill Hold to move the eMTB in a controlled manner, for example.

Push assist or hill start assist
Press and hold the minus button and start pedaling: Thanks to the smart pushing aid, you can push your eBike more easily. The integrated Hill Hold function also prevents your eBike from rolling back unintentionally. Put your foot on the pedal and hold down the minus button: With the hill start assist, you can start off in a relaxed manner - even on steep terrain.

Product features

Bosch eBike Flow app

Enhancing the eBike
Use the eBike Flow app to download new features and updates for components such as the battery or motor and send them to your eBike via Bluetooth. That way it's always up to date and you get to enjoy more options.

Recording activities
Track your ride and fitness data as soon as you get started. If desired, the Activity Tracking for iPhone users can also sync all data automatically with Apple Health. When you take a break, the recording stops automatically.

Customising riding modes
Adjust the riding mode exactly to your needs: You can finely adjust the Eco, Tour, Sport and Turbo riding modes so that they offer you more support or consume less power.

Everything at a glance
Use the Home screen to gain a quick overview of everything that's important. Whether battery status, remaining range, distance travelled or the next service appointment, the Home screen clearly shows you everything you need to know with constantly updated eBike data.

System Controller and Mini Remote

	Simple operation Focus completely on the traffic in the city or on your ride.
	Robust functional companion The System Controller is perfect for modern eCity bikes or eMTBs.
	Constant extensions Connect your smartphone to the System Controller and benefit from new features via the eBike Flow app.
	Minimalistic look System Controller and Mini Remote have an unadulterated and clean eBike look.

System Controller

Mini Remote

As an additional operating panel, the Mini Remote supplements the System Controller, extends the range of functions and enables safe operation. It is connected to the System Controller via Bluetooth and can be flexibly mounted on the handlebar. The buttons near the thumb keep the hands on the handlebar at all times. More keys offer more functions: with the Mini Remote you get practical features like the smart Push Assist and you can turn your eBike light on or off.

Quickly retrofittable
The Mini Remote can be quickly retrofitted and is connected to the System Controller via Bluetooth.

Three keys, more functions
The keys of the Mini Remote have dual assignments: riding mode, light function, smart Push Assist, and for controlling a display.

Full flexibility
The Mini Remote works with or without display. Operate the Ride screen of the eBike Flow app or your display screens.

Intuitive operation
Short distances for the thumb and grippy soft-touch surface: The buttons have icons and can be used intuitively.

Hardware Facts

• Supplement to the system controller for additional functions and convenient operation on the handlebar
  
  • Control of the navigation or ride screen in the eBike Flow app (smartphone) or the Bosch display
  • Smart Push Assist and innovative rollback protection (supports on steep, non-rideable inclines and can prevent the eBike from rolling backwards)
  • Switch light on/off
• Optimal ergonomics of the buttons due to low profile design
• Wireless mounting on the handlebar
• Soft touch surface for extra good grip
• LED indicates low battery of the Mini Remote, pairing activity or lack of connection to the system
• Battery life (coin cell CR1620) can last up to approx. 2 years and can be easily replaced by removing it from the handlebar and inserting it into the rubber insert
• IP54 protected against dust and splash water
• Temperature range: -5 °C to +40 °C (operation) and +10 °C to +40 °C (storage)
• Bluetooth connectivity (Bluetooth 5.0 Low Energy)

Bosch PowerTube 750 battery

Maximum range
The PowerTube 750 makes it easy to conquer long distances and significant variations in altitude. The durable power source enables approx. 20% greater range than the PowerTube 625 and is ideal for extended and challenging rides.

Elegant eBike design
Like all Bosch PowerTubes, the PowerTube 750 is perfectly integrated into the frame of the eBike. An appealing eBike design and high capacity make for an uncompromising combination.

Reliable power source
High safety standards Enormous mileage, long service life, reliable handling — the lithium-ion battery is equipped with a Battery Management System (BMS) that protects the battery cells from overload.

User-friendly operation
The PowerTube 750 is characterised by particularly easy handling. The rechargeable battery is always securely fastened within the frame. It can be removed via an intuitive, lockable mechanism and offers user-friendly handling.

Bosch 4A Charger

Small and lightweight
The 4A charger is the perfect charger with many advantages: It charges quickly, is easy to use and is visually appealing. The small and lightweight charger is ideal for on-the-go charging and supplies the PowerTube 750 with the necessary energy in no time: It takes six hours to fully charge the battery, and just over two hours to charge it halfway. The perfect opportunity for a restful break along the way.