Wolf Tooth Components ReMote Lever
New
Item no:
20123877
Product information "ReMote Lever"
Solve common dropper remote complaints with the compact, ergonomic and sturdy Wolf Tooth ReMote dropper lever.
Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to engineered failure point, the lightweight ReMote leads in every category.
Features - Wolf Tooth Components ReMote
- UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy.
- Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation.
- Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws.
- Low profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.
- Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.
- Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash.
- High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions.
Compatibility
- Compatible with all cable actuated dropper posts.
- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post
- If your post is not listed in the charts below, measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action ReMote will work best. If it is less than 52mm, the Standard ReMote will work best.
Recommendations/compatibility for specific Vario seatposts
- 9point8 Fall Line: Compatible (Light Action ReMote preferred)
- BikeYoke Revive: Preferred
- Bontrager Line: Preferred
- DVO Garnet: Preferred
- Easton Haven: Compatible (Light Action ReMote preferred)
- Fox Transfer: Preferred
- Giant Contact: Preferred
- Gravity Dropper: Preferred
- Kind Shock (all): Preferred
- PNW: Preferred
- OneUp: Compatible (Light Action ReMote preferred)
- Race Face Turbine: Compatible (Light Action ReMote preferred)
- PRO Koryak: Preferred
- Specialized: Preferred
- Thomson: Compatible (Light Action ReMote preferred)
- TransX: Preferred
Version (choose variant)
- 22.2 mm clamp
- 31.8 mm clamp
- Hope
- Shimano I-Spec AB brake
- Shimano I-Spec EV brake
- Shimano I-Spec II brake
- Magura
- SRAM MM brake
Material
- 6061-T6 aluminum
Weight
- starting from 35 g (manufacturer information)
Scope of delivery
- 1 x Wolf Tooth Components ReMote lever
- Manufacturer number: REMOTE-ISII
- UPC: 812719024068
Manufacturer:
Wolf Tooth Components3100 West Park Drive
55306 Burnsville MN
United States
[email protected]
https://www.wolftoothcomponents.com
Person responsible in the EU:
Cosmic Sports GmbHLeyher Str.47
90763 Fürth
Deutschland
[email protected]
https://www.cosmicsports.de
Wolf Tooth Components ReMote Lever
Solve common dropper remote complaints with the compact, ergonomic and sturdy Wolf Tooth ReMote dropper lever.
Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to engineered failure point, the lightweight ReMote leads in every category.
Features - Wolf Tooth Components ReMote
- UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy.
- Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation.
- Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws.
- Low profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.
- Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.
- Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash.
- High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions.
Compatibility
- Compatible with all cable actuated dropper posts.
- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post
- If your post is not listed in the charts below, measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action ReMote will work best. If it is less than 52mm, the Standard ReMote will work best.
Recommendations/compatibility for specific Vario seatposts
- 9point8 Fall Line: Compatible (Light Action ReMote preferred)
- BikeYoke Revive: Preferred
- Bontrager Line: Preferred
- DVO Garnet: Preferred
- Easton Haven: Compatible (Light Action ReMote preferred)
- Fox Transfer: Preferred
- Giant Contact: Preferred
- Gravity Dropper: Preferred
- Kind Shock (all): Preferred
- PNW: Preferred
- OneUp: Compatible (Light Action ReMote preferred)
- Race Face Turbine: Compatible (Light Action ReMote preferred)
- PRO Koryak: Preferred
- Specialized: Preferred
- Thomson: Compatible (Light Action ReMote preferred)
- TransX: Preferred
Version (choose variant)
- 22.2 mm clamp
- 31.8 mm clamp
- Hope
- Shimano I-Spec AB brake
- Shimano I-Spec EV brake
- Shimano I-Spec II brake
- Magura
- SRAM MM brake
Material
- 6061-T6 aluminum
Weight
- starting from 35 g (manufacturer information)
Scope of delivery
- 1 x Wolf Tooth Components ReMote lever
- Manufacturer number: REMOTE-ISII
- UPC: 812719024068
Manufacturer:
Wolf Tooth Components3100 West Park Drive
55306 Burnsville MN
United States
[email protected]
https://www.wolftoothcomponents.com
Person responsible in the EU:
Cosmic Sports GmbHLeyher Str.47
90763 Fürth
Deutschland
[email protected]
https://www.cosmicsports.de
Evaluations
Login
neleCustomerReviews.detail.tabReview.info
Last viewed