The article has been added successfully.
67 more products in this categoryShow more products in this category

Rohloff Splined Carrier Adapter with Snap Ring Circlip small

Rohloff-Splined-1.jpg
Rohloff-Splined-2.jpg
   
This product is currently not available!
Please notify me as soon as the item is available for delivery again.
  • not avaliable
RRP* €27.90 €23.95
saved 14 %

incl. 19% VAT, plus €3.99 shipping costs

Best Price Request

If you find an item at a lower price with another commercial internet retailer, you will receive it from us at the same price, provided the conditions listed in the link are met.

For details about the Best Price Guarantee, please look here:
Bike-Discount Best Price Guarantee

The best price enquiry will only be processed after your order has been submitted.
The granting of a best price is not combinable with other promotions (e.g. "free articles) from Bike-Discount.

Competitor's price:

Shipping costs incurred by the competitor and your message to us:


20043523
Splined Carrier Adapter with Snap Ring Circlip small
It is possible to retrofit the new splines sprocket system to every Rohloff SPEEDHUB 500/14 transmission. One must simply remove the old, worn sprocket using a chainwhip and our special sprocket remover tool.

Features

  • All Rohloff Splined Sprockets are reversible and constructed to offer a 3mm wider chainline (than the original threaded sprockets) (position of largest sprocket on modern triple cranksets)
  • The belt-line with Carrier of a Carbon Drive transmission remains 55mm (+/-1mm) as before
  • The extended range of sprocket sizes now available, offers a greater choice of primary transmission ratios and thus gear-inches

Material

  • Stainless steel

Weight

  • 38g

Scope of delivery

  • 1 Rohloff Splined Carrier Adapter with Snap Ring Circlip small

Recommendation

Experience shows that regular commuter/leisure cyclists will be best suited using a transmission factor of 2.5 -2.8 Offroad cyclists using 29er/650B/Fatbikes tend to opt for a lighter gear ratio. Solo cyclists weighing less than 100kg may do so. This lighter ratio must not fall below 1.9 however!

The higher the chainring/sprocket ratio, the lower the input torque to the gear-unit. It is imperative therefore that the chainring/sprocket factor does not drop below 1.9 (e.g. 34/17=2.0). The smallest permissible sprocket ratios for a rider weighing less than 100kg are: 40:21, 36:19, 34:18, 32:17, 30:16, 28:15, 26:14 und 26:13 = Factor ~ 1,9.

These are the equivalent to a 22:40 combination on a conventional drivetrain. There is no limit whatsoever for higher ratios which means that you can mount bigger chainrings than shown on the table for extreme downhill racing.

If the SPEEDHUB is mounted on a tandem bicycle or if the rider weighs over 100kg, a chainring/sprocket factor of 2.5 (e.g. 42/17=2.5) must be upheld. This equates to sprocket ratios of: 34:13, 35:14, 38:15, 40:16, 42:17, 45:18, 48:19, 52:21.

ATTENTION
Chain-cases such as Hebie must be checked individually for compatibility. The chain-case must run collision free without touching either hub shell nor the splined carrier!
8540S
4250307407422
Splined Carrier Adapter with Snap Ring Circlip small
It is possible to retrofit the new splines sprocket system to every Rohloff SPEEDHUB 500/14 transmission. One must simply remove the old, worn sprocket using a chainwhip and our special sprocket remover tool.

Features

  • All Rohloff Splined Sprockets are reversible and constructed to offer a 3mm wider chainline (than the original threaded sprockets) (position of largest sprocket on modern triple cranksets)
  • The belt-line with Carrier of a Carbon Drive transmission remains 55mm (+/-1mm) as before
  • The extended range of sprocket sizes now available, offers a greater choice of primary transmission ratios and thus gear-inches

Material

  • Stainless steel

Weight

  • 38g

Scope of delivery

  • 1 Rohloff Splined Carrier Adapter with Snap Ring Circlip small

Recommendation

Experience shows that regular commuter/leisure cyclists will be best suited using a transmission factor of 2.5 -2.8 Offroad cyclists using 29er/650B/Fatbikes tend to opt for a lighter gear ratio. Solo cyclists weighing less than 100kg may do so. This lighter ratio must not fall below 1.9 however!

The higher the chainring/sprocket ratio, the lower the input torque to the gear-unit. It is imperative therefore that the chainring/sprocket factor does not drop below 1.9 (e.g. 34/17=2.0). The smallest permissible sprocket ratios for a rider weighing less than 100kg are: 40:21, 36:19, 34:18, 32:17, 30:16, 28:15, 26:14 und 26:13 = Factor ~ 1,9.

These are the equivalent to a 22:40 combination on a conventional drivetrain. There is no limit whatsoever for higher ratios which means that you can mount bigger chainrings than shown on the table for extreme downhill racing.

If the SPEEDHUB is mounted on a tandem bicycle or if the rider weighs over 100kg, a chainring/sprocket factor of 2.5 (e.g. 42/17=2.5) must be upheld. This equates to sprocket ratios of: 34:13, 35:14, 38:15, 40:16, 42:17, 45:18, 48:19, 52:21.

ATTENTION
Chain-cases such as Hebie must be checked individually for compatibility. The chain-case must run collision free without touching either hub shell nor the splined carrier!
8540S
4250307407422
Evaluations
    5 Stars _ (0)
    4 Stars _ (0)
    3 Stars _ (0)
    2 Stars _ (0)
    1 Stars _ (0)
To submit a rating, please log in
Last viewed