Racingbros Modi low friction Scraper Set 36mm (FOX - X Fusion)
Product information "Modi low friction Scraper Set 36mm (FOX - X Fusion)"
Features
- Hybrid mixture: The peculiarity of this scraper is on the addition of MoS2, graphite and PTFE in the Lycran material. This enables a very low breakaway torque is achieved, which improves the response of the fork.
- One-piece construction: The one-piece wiper performance modes of Racingbros unite dust seal and oil seal in one component. This they hold, as compared to conventional two-piece seals where a higher system pressure of up to 20 kg / cm. The oil inside the fork is held reliably be kept away from the inside of the fork in the system while dirt, mud or sand.
- Long shelf life: both in long-term test of 20,000 suspensions under spraying mud, sand, water and ice as well as Numerous test pilots during the development phase, the high quality has shown:
- completely waterproof and UV-resistant
- Working Temperature of -25 ° -80 ° Celsius
- Best Value for money: Compared to the aftermarket fork seals manufacturer cheaper.
These seals are suitable for the following models with 36mm fork stanchions:
- FOX 36 VAN
- FOX 36 VAN R
- FOX 36 VAN RC2
- FOX 36 VAN R Performance
- FOX 36 Talas
- FOX 36 Talas R
- FOX 36 Talas RC2
- FOX 36 Talas 180
- X-Fusion Vengeance
- X-Fusion Vengeance R
- X-Fusion Vengeance HLR
Scope of delivery
- 1 x Wiper Set 36 mm
- Manufacturer number: R1510004
- EAN: 806891001474
Racingbros Modi low friction Scraper Set 36mm (FOX - X Fusion)
Features
- Hybrid mixture: The peculiarity of this scraper is on the addition of MoS2, graphite and PTFE in the Lycran material. This enables a very low breakaway torque is achieved, which improves the response of the fork.
- One-piece construction: The one-piece wiper performance modes of Racingbros unite dust seal and oil seal in one component. This they hold, as compared to conventional two-piece seals where a higher system pressure of up to 20 kg / cm. The oil inside the fork is held reliably be kept away from the inside of the fork in the system while dirt, mud or sand.
- Long shelf life: both in long-term test of 20,000 suspensions under spraying mud, sand, water and ice as well as Numerous test pilots during the development phase, the high quality has shown:
- completely waterproof and UV-resistant
- Working Temperature of -25 ° -80 ° Celsius
- Best Value for money: Compared to the aftermarket fork seals manufacturer cheaper.
These seals are suitable for the following models with 36mm fork stanchions:
- FOX 36 VAN
- FOX 36 VAN R
- FOX 36 VAN RC2
- FOX 36 VAN R Performance
- FOX 36 Talas
- FOX 36 Talas R
- FOX 36 Talas RC2
- FOX 36 Talas 180
- X-Fusion Vengeance
- X-Fusion Vengeance R
- X-Fusion Vengeance HLR
Scope of delivery
- 1 x Wiper Set 36 mm
- Manufacturer number: R1510004
- EAN: 806891001474
Die Abstreifer haben einen Flansch, der wesentlich größer ist als die originalen Fox (hier fast keine Erhöhung des Durchmesser ggü. Einpressdurchmesser). Passen somit zumindest bei meiner "Wald-und-Wiesen" Rhythm 2019 Gabel mit Grip Kartusche und Float Luftfeder nicht. Hier ist der Originalflansch in das Casting eingearbeitet und passt sehr gut. Da die Gabel aber schon zerlegt war, musste ich die Crush-Washer aus diesem Set trotzdem benutzen. Originale Abstreifer waren zum Glück noch nicht rausgenommen. Nächstes Mal lieber 5 Euro mehr und dafür Original Qualität. Ach übrigens: Farbe der Abstreifer ist entgegen dem Bild grau, vielleicht daher auch der weiter überstehende Flansch. Auf diesem Bild dachte ich nämlich keinen erkennen zu können. Sehr blöd.
To submit a rating, please log in. We do not check whether the rated item was purchased from us.
Last viewed