Centurion Backfire R800i EP3 750 Infrared

What components does the smart system from Bosch consist of?

Bosch Performance Line CX motor

Powerful uphill
The maximum torque of 85 Nm has a noticeable effect on your riding behaviour when eMountain biking. The powerful motor enables powerful acceleration after tight bends and obstacles at a low cadence and simplifies hill starts. For fast sprints, the motor also supports you at high pedalling frequencies.

Intuitive handling
One mode for more focus: The eMTB mode, specially designed for sporty use, gives you optimum control and intuitive handling, as you don't have to switch between the different riding modes as often. With this clever eMTB mode function, technical passages can be ridden with confidence and obstacles such as roots and thick branches can be easily overcome with targeted pedal pressure using the Extended Boost. The Performance Line CX drive unit ensures even more riding fun and a flow experience that sets new standards.

Maximum agility
The multi-sensor concept enables controlled and manoeuvrable riding even on technically demanding trails, combined with the innovative Bosch motor control, it stands for maximum dynamics and sensitivity.

Sporty and economical
Sporty riding on a trekking bike or eMTB: With the Tour+ riding mode of the Bosch Performance Line CX, the focus is always on riding enjoyment. It eliminates the need to switch between support modes so that you can concentrate fully on eBiking. With Tour+ mode, you pedal harder on flat stretches than in Tour mode and are more sporty on the road - the riding mode therefore saves power and extends your radius - for even more riding fun! Trail or tarmac - Tour+ mode always suits you. Because it constantly adapts to you. Sensors on the motor measure important riding data more than 1,000 times per second, from which the Tour+ mode derives the optimum support for you. It regulates the additional power so sensitively that you not only get a natural riding experience, but also a greater range when you use more power.

Customised riding experience
The available riding modes can be customised in the eBike Flow app so that the eBike's riding behaviour matches your own riding style or the route you have chosen. The level of assistance, dynamics, maximum speed and maximum torque of the drive can thus be flexibly customised to your personal needs and requirements. Intensive training or an extended eBike tour - the riding modes always offer you the right support and make riding even more fun.

The riding modes of the Bosch e-bike - the smart system

Turbo:

• Direct and maximum powerful assistance up to the highest pedalling frequencies for sporty riding.
• Support level: 340%
• Maximum drive torque: 85 Nm

eMTB:

• The eMTB mode varies dynamically between the Tour and Turbo riding modes - progressive motor support for maximum performance on the trail.
• Support level: 140% - 340%
• Maximum drive torque: 85 Nm

Tour:

• Consistent support for long distances, with a clear focus on long range.
• Support level: 140%
• Maximum drive torque: 50 Nm

Tour+:

• Dynamic assistance for maximum riding enjoyment and a sporty riding style.
• Support level: 60% - 340%
• Maximum drive torque: 85 Nm

Eco:

• Effective but gentle assistance, designed for maximum efficiency for long ranges.
• Support level: 60%
• Maximum drive torque: 40 Nm

eBike Flow app

The eBike Flow app is the centrepiece of our smart system and gives you a better, connected riding experience: safer, more individual and more comfortable.

eBike Lock - free additional protection against theft

Ideal addition - park your eBike. Enjoy time out.
eBike Lock is free of charge for all eBikes with the smart system. When you switch on your eBike, it automatically checks whether your smartphone is nearby as a digital key. Only then is the motor assistance enabled and your eBike unlocked.

Display as a key - use your Kiox 300 or Kiox 500 as a key
It's as intuitive as it sounds: you remove the display from the bracket and stow it away. This quickly gives your eBike additional protection. Put the display back in and use it to activate the motor assistance to set off.

Unlocking via smartphone - unlock eBike manually via smartphone
Instead of unlocking your eBike automatically, you can also unlock it manually using your smartphone with a button on the home screen.

Battery Lock - digitally lock the battery

Additional protection - protect a valuable component of your eBike
With Battery Lock, you can also protect your eBike battery digitally: This function ensures that your battery can no longer be used if it is stolen.

Digital keys - Flexible with a digital key
You can use several digital keys at the same time for Battery Lock: your smartphone with the eBike Flow app and your Kiox 300 or Kiox 500.

Flow+ - Premium service with Flow+
Battery Lock is available as a premium service from Flow+. You can test Flow+ free of charge - for 12 months with the ConnectModule. Without the ConnectModule, you get one month for free.

Protect your eBike - eBike Alarm

Carefree parking - valuable location and status information
Whether you're only parking your eBike for a short time or away for a longer period of time, you can stay connected and relaxed via your smartphone.

Two-stage alarm - audible and visual alarm
Your eBike warns you with sound signals and illuminated LEDs if it detects movement or is moved. You will also receive a notification on your smartphone.

Tracking functions - helpful location tracking
If your eBike is moved a lot, you can use the tracking function to track its location.

eBike Pass - All data always to hand
The eBike passport allows you to keep track of important information about your eBike. Data about the eBike is stored here. You can add details manually - even independently of eBike Alarm.

Theft report - quick help in the event of theft
If your eBike is stolen, you can create a document with all the important information about the incident for the police based on the data from the eBike Pass - and add a live tracking link.

Navigation - Exploring means experiencing

Route planning - plan according to your needs
Select the route profile and map details that suit your journey. Plan your own routes with intermediate destinations or import existing ones from komoot.

Display navigation - Navigate precisely with your display
The navigation function for Kiox 300, Kiox 400C and Kiox 500 takes you precisely to your destination - with turn-by-turn directions and clear route guidance. If you have subscribed to Flow+, you will receive even more map details on your display.

Ride Screen - turn your smartphone into an eBike display
You can use the Ride Screen with the SmartphoneGrip. It not only shows you all the important riding data, but also offers fully-fledged navigation with 3D map display - even in portrait format.

Activity tracking - automatically record and analyse ride data
The eBike Flow app records your ride data as soon as you set off. The statistics provide you with valuable insights into your tour and fitness data - for analysing and sharing. If desired, all data can also be automatically synchronised with Apple Health.

koomot and Strava - Connect the eBike Flow app with your favourite apps
Transfer your routes from komoot to the eBike Flow app, synchronise your activities with Strava and share your successes with your friends or your community.

Personalise your eBike - as individual as you are

Display configuration
Configure your Kiox 300, Kiox 400C or Kiox 500 display according to your needs. Create new screens with your favourite information. Choose from over 30 display options and organise them as you wish.

Individual riding modes - tune and customise
Support, dynamics, maximum torque and maximum speed - you decide what you need. You can also put together your favourite riding modes. Choose from all the riding modes available for your eBike.

Performance upgrade - more power when it counts
Determine the performance values of your Drive Unit yourself - and set them in the individual riding modes of the eBike Flow app. For example, you can overtake more easily or accelerate faster.

Further functions

Over-the-air updates
Updates keep your eBike up to date and even improve it. You can easily download new eBike functions and transfer them to your eBike via Bluetooth.

One account. Multiple eBikes
The eBike Flow app becomes your digital garage: you can add up to six eBikes to your account - and easily switch between them.

Digital service book
Your Bosch eBike dealer can synchronise the data of your service appointments with the eBike Flow app. Simply tap on "My eBike" in the app settings and you will find a record of what was done when your eBike was serviced.

CO₂ savings
After your ride, find out how many CO₂ emissions you have saved compared to a car journey.

Bosch Intuvia 100 display - the easy-to-understand everyday companion

With Intuvia 100, you get a display that is intuitive to use and lets you start riding straight away. Thanks to the large font, the display is particularly clear and, together with the shift recommendation, gives you more safety and comfort when riding. Operation is intuitive via the control unit - so your hands stay safely on the handlebars.

Features

Important riding data

• Intuvia 100 provides information on distance, journey time, range, speed, time and riding mode

Exact battery status

• Intuvia 100 shows you information on the charge level of the eBike battery to the exact percentage

Helpful gear change recommendation

• Available soon: Get guidance on when to change gear - and increase your range

Information on theft protection

• Intuvia 100 shows you whether eBike Lock is active and motor assistance is deactivated

Highlights of the Intuvia display

Smart push assistance
The Intuvia 100 also helps you on steep climbs: it shows whether the smart push assistance has been activated via the control unit. It supports you when pushing your eBike uphill. If you move your eBike within 10 seconds according to the instructions on the display, the motor will assist you - and prevent the bike from rolling back thanks to the hill hold. This makes it easier for you to make progress even when walking.

Traceable activity data
See what you have achieved: When you remove the Intuvia 100 from the holder after your tour, you can use the button on the back to display values such as the distance or duration of your tour. The display changes with each click of the button. After 60 seconds, your Intuvia 100 switches off automatically to save battery power. If your eBike was connected to the eBike Flow app during your ride, you can also call up your activity data in the app.

Helpful service tip
Keep your eBike up to date and in good working order: A message with a spanner icon on the Intuvia 100 indicates that the next service is due. The service intervals are determined by the specialist dealer, either according to a certain period of time or a certain number of kilometres ridden. You don't have to remind yourself of your service appointments and your eBike is always kept up to date with regular checks.

Simple attachment and positioning
You can position the Intuvia 100 mount on the handlebars where it suits you best both visually and functionally - either above or in front of the stem. With a twisting motion, you can easily attach the display to its mount and adjust it to the optimum angle for you - for good readability and a comfortable ride.

Simple operation
You can operate Intuvia 100 safely and intuitively using the LED Remote or the Mini Remote.

eBike Lock
eBike Lock, as additional theft protection for your eBike, is a free feature in the smart system. Activate the motor assistance using your smartphone as a digital key. The lock status is shown on the Intuvia 100 display and in the eBike Flow app.

Power supply
The display is powered by a replaceable button cell.

Optimum readability
A 2.5-inch display, clearly organised functions, large font and high contrast ensure that you can read the Intuvia 100 easily in any weather.

Wireless look
Intuvia 100 is wirelessly connected to the LED Remote or Mini Remote via Bluetooth.

Practical switching recommendation
Intuvia 100 has a shift recommendation and shows you when you should shift up or down a gear.

System Controller and Mini Remote

	Simple operation Concentrate fully on the traffic in the city or on your trail ride.
	Robust and functional companion The System Controller is perfect for modern eUrban bikes or sporty eMTBs.
	Continuous extensions Connect your smartphone to the System Controller and benefit from new functions via the eBike Flow app.
	Minimalist look System Controller and Mini Remote stand for an unadulterated and clean eBike look.

System Controller

Minimalist, robust control unit
The System Controller is the control unit for eBikes with the smart system, reduced to the essentials. The deliberately limited number of functions and information facilitates a quick overview and is not distracting while riding. The System Controller is seamlessly integrated into the top tube - this means that the already robust companion is additionally protected, is barely noticeable and is perfect for sporty tours and design-orientated eBike fans.

LED display
LEDs in different colors indicate the riding mode and battery charge level in 10% increments.

Connected in a smart system
The System Controller makes your eBike smart and is the interface for software updates.

Built into the top tube
The System Controller is barely noticeable, is made of robust material and is therefore protected from knocks and scratches.

Two buttons
You can control the most important functions of your eBike with just two buttons: Switch your eBike on or off and change the riding mode.

Hardware facts

• Indication of the current charge status of the eBike using the five charge status LEDs
• Indication of the assistance level by the color display of the riding mode LED: red, purple, blue, green
• Expandable with Mini Remote for additional functions and more convenient operation
  • Modular use: The System Controller can be used in conjunction with the Mini Remote to control the eBike Flow app and the Bosch display while riding
  • Use of the pushing aid via the Mini Remote and display of the status by rolling illumination of the charging status LEDs on the System Controller (white = pushing aid ready; ice blue = pushing aid active)
  • Switching the light on/off
• Ambient light sensor automatically adjusts the brightness of the LEDs
• Two-component design: combination of soft-touch surface and hard material for optimum ergonomics and robustness
• Replaceable and long-lasting battery lasts up to approx. 7 years
• Display of the ABS function via ABS LED (only for eBikes with Bosch eBike ABS)
• Diagnostic interface (type: USB-C) for diagnosing the eBike system or for charging the integrated battery of the system controller
• System connector for connecting the eBike system
• IP54 protected against dust and splash water
• Temperature range: -5 °C to +40 °C (operation) and +10 °C to +40 °C (storage)
• Only available for eBikes with the smart system

Mini Remote

As an additional operating unit, the Mini Remote complements the System Controller, extends the range of functions and enables safe operation. It is connected to the System Controller via Bluetooth and can be flexibly mounted on the handlebars. The buttons near the thumb keep your hands on the handlebars at all times. More buttons offer more functions: With the Mini Remote, you get practical features such as the smart pushing aid and you can switch your eBike light on or off.

Quick to retrofit
The Mini Remote can be retrofitted quickly and is connected to the System Controller via Bluetooth.

Three buttons, more functions
The buttons on the Mini Remote have two functions: for the riding mode, the light function and the smart pushing aid, as well as for controlling a display.

Full flexibility
The Mini Remote works with or without a display. Operate the ride screen of the eBike Flow app or your display screens.

Intuitive operation
Short distances for the thumb and non-slip soft-touch surface: the buttons are labelled with icons and can be used intuitively.

Hardware facts

• Optional addition to the system controller for additional functions and convenient operation on the handlebars
  • Control of the ride screen or navigation screen in the eBike Flow app (smartphone) or the Bosch display
  • Smart pushing aid and innovative roll-back protection (provides support on steep, unrideable inclines and can prevent the eBike from rolling backwards)
  • Switch light on/off
• Optimum ergonomics of the buttons thanks to flat design
• Wireless mounting on the handlebars
• Soft-touch surface for particularly good grip
• LED indicates low Mini Remote battery, pairing activity or no connection to the system
• The battery life (button cell CR1620) can be up to approx. 2 years and can be easily replaced by removing it from the handlebars and inserting it into the rubber insert
• IP54 protected against dust and splash water
• Temperature range: -5 °C to +40 °C (operation) and +10 °C to +40 °C (storage)
• Only available for eBikes with the smart system
• Bluetooth connectivity (Bluetooth 5.0 Low Energy)

Bosch PowerTube 750 battery

Maximum range
With the PowerTube 750, long distances and many metres in altitude are easy to master. The long-lasting energy supplier enables an approx. 20 % greater range than the PowerTube 625 and is ideal for long and demanding tours.

Stylish eBike design
Like all Bosch PowerTubes, the PowerTube 750 is perfectly integrated into the frame. An attractive eBike design and high capacity - a combination without compromise.

Reliable energy supplier
High safety standards. Enormous mileage, long service life, reliable handling - the lithium-ion battery is equipped with a battery management system that protects the battery cells from overload.

User-friendly handling
The PowerTube 750 is characterised by its particularly easy handling. The battery is always securely anchored in the frame on all tours, removal is via an intuitive, lockable mechanism and offers you user-friendly operation.