Content 0.5 l (39,98 € / 1 l)
Brunox IX 100 Corrosion Protection and Wax Sealant 500ml
15,99 €
incl. 19% VAT
- In stock, delivery time 1-3 Days
Product information "IX 100 Corrosion Protection and Wax Sealant 500ml"
BRUNOX® IX 100 forms a compact waxy protective film, which does not become brittle and protects durably against most environmental influ-ences. The perfect high-quality sealing protects even against direct weather influences, against flue gas atmosphere and salt water.
Features - BRUNOX® IX100
- High-quality corrosion protection & wax-based sealing for long-term storage and overseas shipping.
- Free of silicone, PTFE, graphite
- Very elastic underbody protection. Good cavity sealing.
- Long-term corrosion protection - wax sealant: Indoor 5 years, covered 1.5 years, outdoor 1 year
- For protection against aggressive vapors, alkalis, chlorides & high humidity. For sealing cable lugs & screw terminals.
- Underbody protection & cavity sealing to preserve value and for restoration. For the preservation & restoration of brake lines.
- Maintains and protects roller trainers and indoor fitness equipment
- Can be used on a variety of surfaces
- Compatible with BRUNOX® epoxy®
Product properties
- Water resistance: High
- Corrosion protection:
- Indoor: 5 years
- covered: 1.5 years
- Outdoor: 1 year
- Density (20°C):
- Aerosol: 0.89 ± 0.04 g/cm3
- Bulk: 0.93 ± 0.04 g/cm3
- Dynamic viscosity (20°C):
- Aerosol: 48 mPas
- Bulk: 480 mPas
- Yield: 40 - 16 m2/L, (25 - 50 μm)
- Consistency: Dry, non-slip, waxy film
- Drying time:
- Dust-dry after 1 - 2 hours (stays soft for a longer time)
- Curved after 12 hours (touch proof)
- Temperature-resistant: up to 80°C
- Layerthickness: 25-50 µm
- Flash point:
- Aerosol: <0°C
- Bulk: 51°C
Application
- BRUNOX® IX 100 is uniformly applied to the dry surface*, if need be, in multiple layers, by spray can, brush, airless or air pressure gun. The parts to be treated can also be dipped.
- If the surface is slightly moist, we recommend a prior treatment with BRUNOX® Turbo-Spray®. Spray it into all crevices and corners so that the moisture is expelled, any other water just rolls off.
- Then, with a rag, wipe off the BRUNOX® Turbo-Spray® layer and apply BRUNOX® IX 100.
- The applied layer thickness should be at least 20 μm.
- The best possible corrosion protection is achieved with a dry film thickness of about 50 μm.
- BRUNOX® IX 100 can be removed after successful protection with white spirit, cleaning solvent, or by using a high pressure cleaner and a surfactant solution.
Contents
- 500 ml
Scope of delivery
- 1 Brunox® IX 100 Corrosion Protection and Wax Sealant 500ml
- Manufacturer number: BR100IX0,50TS
- EAN: 7610567921255
Adlzreiterstrasse 13
85051 Ingolstadt
Deutschland
[email protected]
https://www.brunox.swiss/
Brunox IX 100 Corrosion Protection and Wax Sealant 500ml
BRUNOX® IX 100 forms a compact waxy protective film, which does not become brittle and protects durably against most environmental influ-ences. The perfect high-quality sealing protects even against direct weather influences, against flue gas atmosphere and salt water.
Features - BRUNOX® IX100
- High-quality corrosion protection & wax-based sealing for long-term storage and overseas shipping.
- Free of silicone, PTFE, graphite
- Very elastic underbody protection. Good cavity sealing.
- Long-term corrosion protection - wax sealant: Indoor 5 years, covered 1.5 years, outdoor 1 year
- For protection against aggressive vapors, alkalis, chlorides & high humidity. For sealing cable lugs & screw terminals.
- Underbody protection & cavity sealing to preserve value and for restoration. For the preservation & restoration of brake lines.
- Maintains and protects roller trainers and indoor fitness equipment
- Can be used on a variety of surfaces
- Compatible with BRUNOX® epoxy®
Product properties
- Water resistance: High
- Corrosion protection:
- Indoor: 5 years
- covered: 1.5 years
- Outdoor: 1 year
- Density (20°C):
- Aerosol: 0.89 ± 0.04 g/cm3
- Bulk: 0.93 ± 0.04 g/cm3
- Dynamic viscosity (20°C):
- Aerosol: 48 mPas
- Bulk: 480 mPas
- Yield: 40 - 16 m2/L, (25 - 50 μm)
- Consistency: Dry, non-slip, waxy film
- Drying time:
- Dust-dry after 1 - 2 hours (stays soft for a longer time)
- Curved after 12 hours (touch proof)
- Temperature-resistant: up to 80°C
- Layerthickness: 25-50 µm
- Flash point:
- Aerosol: <0°C
- Bulk: 51°C
Application
- BRUNOX® IX 100 is uniformly applied to the dry surface*, if need be, in multiple layers, by spray can, brush, airless or air pressure gun. The parts to be treated can also be dipped.
- If the surface is slightly moist, we recommend a prior treatment with BRUNOX® Turbo-Spray®. Spray it into all crevices and corners so that the moisture is expelled, any other water just rolls off.
- Then, with a rag, wipe off the BRUNOX® Turbo-Spray® layer and apply BRUNOX® IX 100.
- The applied layer thickness should be at least 20 μm.
- The best possible corrosion protection is achieved with a dry film thickness of about 50 μm.
- BRUNOX® IX 100 can be removed after successful protection with white spirit, cleaning solvent, or by using a high pressure cleaner and a surfactant solution.
Contents
- 500 ml
Scope of delivery
- 1 Brunox® IX 100 Corrosion Protection and Wax Sealant 500ml
- Manufacturer number: BR100IX0,50TS
- EAN: 7610567921255
Adlzreiterstrasse 13
85051 Ingolstadt
Deutschland
[email protected]
https://www.brunox.swiss/
To submit a rating, please log in. We do not check whether the rated item was purchased from us.
Last viewed