Alpina Taunus Gravel MIPS - MTB Helmet
Product information "Taunus Gravel MIPS - MTB Helmet"
In addition, the safety of the Taunus Ravel MIPS is guaranteed by a microshell outer shell in combination with an EPS inner shell. This makes the helmet nice and light and comfortable to wear. Large air intakes ensure sufficient fresh air on your head when you grab your drop bar at the bottom and go full throttle. At best, your gravel trail will take you to a new place. With the Taunus Gravel MIPS, you are definitely equipped for new adventures.
Features - Taunus Gravel MIPS
- MIPS: is a system that protects against brain injuries that can be caused by rotational movements in the event of an impact
- Hi-EPS: small air chambers absorb forces in the event of an impact to protect the head
- Inmold: the thermal connection between the upper and lower shell makes the helmet light and stable
- Edge Protect: increases the durability of the helmet by covering the edges
- Ceramic Shell: break- and scratch-resistant, UV-stable and antistatic
- Run System Ergo MIPS: size adjustment system with integrated MIPS
- Shield Protect: the removable shield protects against splashing dirt as well as direct sunlight
- Weight: approx. 295 g
Technologies
MIPS
MIPS is a system that protects against brain injuries that can be caused by rotational movements in the event of an impact. The low-friction insert enables a sliding movement of 10 to 15 mm in all directions and thus reduces the rotational movement in the event of a fall. MIPS thus offers additional protection.
HI-EPS
The inner shell of every Alpina helmet is made of Hi-EPS ("High Expanded Polystyrene"). It consists of microscopically small air chambers which optimally absorb the forces acting on the helmet in the event of an impact. HI-EPS ensures extra-thin wall thicknesses and narrow helmet shapes despite its optimum protective effect.
INMOLD
In the Inmold production process, the polycarbonate upper shell of the helmet is "bonded" to the EPS granules of the helmet body under high heat and pressure. This creates a large and inseparable bond between the upper and lower shells. Advantage: The helmet is very light and extremely stable at the same time.
EDGE PROTECT
Edge Protect is a processing method that ensures that Inmold helmets have no sharp edges. This reduces the risk of injury in two ways: firstly, the hands are protected when handling the helmet, and secondly, in the event of an impact, the neck and shoulder area are protected from scratches on contact with the lower edge of the helmet.
CERAMIC SHELL
All Inmold-manufactured helmets from Alpina have this shatterproof and scratch-resistant polycarbonate shell. The blank is stretched under high heat to the shape of the subsequent helmet and pressed onto its Hi-EPS body under high pressure. The material is characterized by several qualities at the same time: It is break- and scratch-resistant, UV-stable and antistatic.
RUN SYSTEM ERGO MIPS
The first fitting system with integrated MIPS. The RUN SYSTEM ERGO FLEX MIPS offers individual, height-adjustable adjustment of the helmet. This combination not only increases comfort, but also ensures additional safety in the event of impacts with rotational forces.
SHIELD PROTECT
The removable shield protects against splashing dirt as well as direct sunlight.
- Manufacturer number: A9802310
- EAN: 4003692328397
Hirschbergstr. 8-10
85254 Sulzemoos
Deutschland
https://www.alpina-sports.com/de/contact
https://www.alpina-sports.com/de/
Alpina Taunus Gravel MIPS - MTB Helmet
In addition, the safety of the Taunus Ravel MIPS is guaranteed by a microshell outer shell in combination with an EPS inner shell. This makes the helmet nice and light and comfortable to wear. Large air intakes ensure sufficient fresh air on your head when you grab your drop bar at the bottom and go full throttle. At best, your gravel trail will take you to a new place. With the Taunus Gravel MIPS, you are definitely equipped for new adventures.
Features - Taunus Gravel MIPS
- MIPS: is a system that protects against brain injuries that can be caused by rotational movements in the event of an impact
- Hi-EPS: small air chambers absorb forces in the event of an impact to protect the head
- Inmold: the thermal connection between the upper and lower shell makes the helmet light and stable
- Edge Protect: increases the durability of the helmet by covering the edges
- Ceramic Shell: break- and scratch-resistant, UV-stable and antistatic
- Run System Ergo MIPS: size adjustment system with integrated MIPS
- Shield Protect: the removable shield protects against splashing dirt as well as direct sunlight
- Weight: approx. 295 g
Technologies
MIPS
MIPS is a system that protects against brain injuries that can be caused by rotational movements in the event of an impact. The low-friction insert enables a sliding movement of 10 to 15 mm in all directions and thus reduces the rotational movement in the event of a fall. MIPS thus offers additional protection.
HI-EPS
The inner shell of every Alpina helmet is made of Hi-EPS ("High Expanded Polystyrene"). It consists of microscopically small air chambers which optimally absorb the forces acting on the helmet in the event of an impact. HI-EPS ensures extra-thin wall thicknesses and narrow helmet shapes despite its optimum protective effect.
INMOLD
In the Inmold production process, the polycarbonate upper shell of the helmet is "bonded" to the EPS granules of the helmet body under high heat and pressure. This creates a large and inseparable bond between the upper and lower shells. Advantage: The helmet is very light and extremely stable at the same time.
EDGE PROTECT
Edge Protect is a processing method that ensures that Inmold helmets have no sharp edges. This reduces the risk of injury in two ways: firstly, the hands are protected when handling the helmet, and secondly, in the event of an impact, the neck and shoulder area are protected from scratches on contact with the lower edge of the helmet.
CERAMIC SHELL
All Inmold-manufactured helmets from Alpina have this shatterproof and scratch-resistant polycarbonate shell. The blank is stretched under high heat to the shape of the subsequent helmet and pressed onto its Hi-EPS body under high pressure. The material is characterized by several qualities at the same time: It is break- and scratch-resistant, UV-stable and antistatic.
RUN SYSTEM ERGO MIPS
The first fitting system with integrated MIPS. The RUN SYSTEM ERGO FLEX MIPS offers individual, height-adjustable adjustment of the helmet. This combination not only increases comfort, but also ensures additional safety in the event of impacts with rotational forces.
SHIELD PROTECT
The removable shield protects against splashing dirt as well as direct sunlight.
- Manufacturer number: A9802310
- EAN: 4003692328397
Hirschbergstr. 8-10
85254 Sulzemoos
Deutschland
https://www.alpina-sports.com/de/contact
https://www.alpina-sports.com/de/
Configuration
| Manufacturer: | Alpina |
|---|---|
| Women/men/unisex: | Unisex |
| Use: | Gravel-Bike |
| Colour: | white matt |
| Weight: | approx. 295 g |
To submit a rating, please log in. We do not check whether the rated item was purchased from us.
Last viewed