Magura MT4 HC 1-finger lever blade rear disc brake 1500mm TOP-DEAL
Product information "MT4 HC 1-finger lever blade rear disc brake 1500mm TOP-DEAL"
The perfect all-rounder - The MT4 with HC 1-finger lever blade from Magura has top riding performance and an enhanced braking effect. The innovative technology allows the combination of impeccable braking reliability and control.
You can apply just as much or as little braking power as you require, thanks to the adjustable lever reach setting and the ergonomically-matched, HC one-finger lever blade. You'll enjoy your bike trails much more with this cutting-edge technology at your fingertips. The MT4 is also 100% perfect for e-bikes up to 25 km/h.
Features - Magura MT4 HC Disc Brake
Ergonomic, HC 1-finger, aluminium lever blade
Carbotecture® housing & handlebar clamp
Adjustable lever reach
Forged, 2-piston brake calliper
magnetiXchange brake pistons for easy brake pad replacement
Compatible with all MAGURA Storm and Storm SL discs
Product Features
Use: MTB
Technical features: Full hydraulic dual piston floating caliper
Pad wear adjustment: Automatic
Brake pads: Organic 7.4 Performance (replaces 7.1), 7.2 Endurance
Brake hose: MAGURA disc tube easily shortened
Transmission medium: MAGURA Royal Blood mineral oil
Hydraulic system: Open, with expansion chamber
Intern. standard mounting (IS): Yes, adaptor
EBT (Easy Bleed Technology): Yes
Feel-Safety-Ergonomic: Yes
Dual Docking for trigger shifters: Yes
Reach adjust: Yes (with tool)
BAT (bite point adjuster): No
magnetiXchange: Yes
OPD (caliper in one-piece design): Yes
Postmount mounting (PM): Yes, direct mount
2-Piece Lever Clamp: Yes
Hose length: 1500 mm
Material
Fitting bolts: Steel
Brake lever: Carbotecture
Caliper: Aluminium forged
Lever blade: Aluminium
Scope of delivery
1 x MT4 HC Carbotecture® Disc Brake 1500 mm (no box packaging)
1 x Brake Pads
1 x Olive
1 x Insert pin
2 x Fastening screw
1 x Transport safety
Attention: The brake hose is charged and has been interrupted by the manufacturer near the brake lever with two metal clips and labelled with a warning. Before using the brake, the hose must be shortened beyond this area and then reconnected.
Rotor and Adapter not included!
For suitable Rotor >CLICK HERE<
For suitable Adapter >CLICK HERE<
Technology
What is Carbotecture?
In the sensitive motorcycle and bicycle industries, MAGURA stands for the highest possible quality, solid reliability and mature components from its in-house production in Germany. In developing special materials and processes such as Carbotecture® and Carbolay®, we have realized designs and constructions that no other manufacturer can implement. We have also established an extremely effective quality assurance system at our Hülben and Hengen production and assembly sites near the original factory in Bad Urach. MAGURA brakes are light, very stable and function reliably for many years – and we realize these features with several plastics that we develop ourselves. However, Carbotecture is definitely not just a “plastic” – it is so much more!
We see ourselves as the architects of our materials – and the term Carbotecture® is a combination of the terms carbon and architecture. Here is a brief explanation of how we create our basic Carbotecture® material: First of all, a mixture of high-tech polymers and carbon or glass fibres is converted into a plastic granulate by means of several complex processes. During the processing from the granulate to the finished component, the carbon fibres are then optimally aligned to match future stress requirements. This “Carboflow” process can create any desired shape from the granulate during an injection moulding process. Carbotecture® offers major advantages compared to classic lightweight aluminium – for example, it’s 50% lighter, but it possesses the same tensile and breaking strength! Thanks to our highly developed machines and processes, Carbotecture® is indeed a dream material, from which smooth surfaces can be created in almost any complex shape – and this is also how we make our rigid yet lightweight brake masters. BMW also relies on the special properties of Carbotecture® for its motorcycles – the clutch master of the BMW GS is also made of this material, for instance.
We increase the resistance of our Carbotecture SL® material by integrating medium-length carbon fibres into the polyamides instead of short fibres – and this also reduces the weight of the material. The brake masters of our award-winning MT disc brake series are made of Carbotecture® and Carbotecture SL®.
Yet another of our materials is Carbolay®. It is produced in a fully automated procedure, during which a textile process is used to position the carbon fibres according to load. The fibres are then automatically impregnated with resin in a mould. This process enables us to produce Carbolay® lever blades in an attractive and ergonomically optimized form – and the blades also achieve perfect finger force transmission thanks to their high degree of rigidity and low weights.
Mounting/Installation a Magura MT4 brake
>
Shorten the tubing/hose of a Magura disc brake MT4
- Manufacturer number: 2004680
Stuttgarter Straße 48
72574 Bad Urach
Deutschland
[email protected]
https://www.magura.com
Magura MT4 HC 1-finger lever blade rear disc brake 1500mm TOP-DEAL
The perfect all-rounder - The MT4 with HC 1-finger lever blade from Magura has top riding performance and an enhanced braking effect. The innovative technology allows the combination of impeccable braking reliability and control.
You can apply just as much or as little braking power as you require, thanks to the adjustable lever reach setting and the ergonomically-matched, HC one-finger lever blade. You'll enjoy your bike trails much more with this cutting-edge technology at your fingertips. The MT4 is also 100% perfect for e-bikes up to 25 km/h.
Features - Magura MT4 HC Disc Brake
Ergonomic, HC 1-finger, aluminium lever blade
Carbotecture® housing & handlebar clamp
Adjustable lever reach
Forged, 2-piston brake calliper
magnetiXchange brake pistons for easy brake pad replacement
Compatible with all MAGURA Storm and Storm SL discs
Product Features
Use: MTB
Technical features: Full hydraulic dual piston floating caliper
Pad wear adjustment: Automatic
Brake pads: Organic 7.4 Performance (replaces 7.1), 7.2 Endurance
Brake hose: MAGURA disc tube easily shortened
Transmission medium: MAGURA Royal Blood mineral oil
Hydraulic system: Open, with expansion chamber
Intern. standard mounting (IS): Yes, adaptor
EBT (Easy Bleed Technology): Yes
Feel-Safety-Ergonomic: Yes
Dual Docking for trigger shifters: Yes
Reach adjust: Yes (with tool)
BAT (bite point adjuster): No
magnetiXchange: Yes
OPD (caliper in one-piece design): Yes
Postmount mounting (PM): Yes, direct mount
2-Piece Lever Clamp: Yes
Hose length: 1500 mm
Material
Fitting bolts: Steel
Brake lever: Carbotecture
Caliper: Aluminium forged
Lever blade: Aluminium
Scope of delivery
1 x MT4 HC Carbotecture® Disc Brake 1500 mm (no box packaging)
1 x Brake Pads
1 x Olive
1 x Insert pin
2 x Fastening screw
1 x Transport safety
Attention: The brake hose is charged and has been interrupted by the manufacturer near the brake lever with two metal clips and labelled with a warning. Before using the brake, the hose must be shortened beyond this area and then reconnected.
Rotor and Adapter not included!
For suitable Rotor >CLICK HERE<
For suitable Adapter >CLICK HERE<
Technology
What is Carbotecture?
In the sensitive motorcycle and bicycle industries, MAGURA stands for the highest possible quality, solid reliability and mature components from its in-house production in Germany. In developing special materials and processes such as Carbotecture® and Carbolay®, we have realized designs and constructions that no other manufacturer can implement. We have also established an extremely effective quality assurance system at our Hülben and Hengen production and assembly sites near the original factory in Bad Urach. MAGURA brakes are light, very stable and function reliably for many years – and we realize these features with several plastics that we develop ourselves. However, Carbotecture is definitely not just a “plastic” – it is so much more!
We see ourselves as the architects of our materials – and the term Carbotecture® is a combination of the terms carbon and architecture. Here is a brief explanation of how we create our basic Carbotecture® material: First of all, a mixture of high-tech polymers and carbon or glass fibres is converted into a plastic granulate by means of several complex processes. During the processing from the granulate to the finished component, the carbon fibres are then optimally aligned to match future stress requirements. This “Carboflow” process can create any desired shape from the granulate during an injection moulding process. Carbotecture® offers major advantages compared to classic lightweight aluminium – for example, it’s 50% lighter, but it possesses the same tensile and breaking strength! Thanks to our highly developed machines and processes, Carbotecture® is indeed a dream material, from which smooth surfaces can be created in almost any complex shape – and this is also how we make our rigid yet lightweight brake masters. BMW also relies on the special properties of Carbotecture® for its motorcycles – the clutch master of the BMW GS is also made of this material, for instance.
We increase the resistance of our Carbotecture SL® material by integrating medium-length carbon fibres into the polyamides instead of short fibres – and this also reduces the weight of the material. The brake masters of our award-winning MT disc brake series are made of Carbotecture® and Carbotecture SL®.
Yet another of our materials is Carbolay®. It is produced in a fully automated procedure, during which a textile process is used to position the carbon fibres according to load. The fibres are then automatically impregnated with resin in a mould. This process enables us to produce Carbolay® lever blades in an attractive and ergonomically optimized form – and the blades also achieve perfect finger force transmission thanks to their high degree of rigidity and low weights.
Mounting/Installation a Magura MT4 brake
>
Shorten the tubing/hose of a Magura disc brake MT4
- Manufacturer number: 2004680
Stuttgarter Straße 48
72574 Bad Urach
Deutschland
[email protected]
https://www.magura.com
Material
neleCustomerReviews.detail.tabReview.info
Last viewed