Shimano XTR BL-M9100+BR-M9100 front disc brake TOP-DEAL
Product information "XTR BL-M9100+BR-M9100 front disc brake TOP-DEAL"
The hydraulic XTR BR-M9100 2-piston disc brake with BL-M9100 2-finger brake lever from Shimano fits seamlessly into the powerful line-up of the XTR M9100 groupset. The highlights: more braking power with less effort and an extremely linear response to the lever movement (without original packaging).
Stable 2-piston disc brake with super braking power: XTR BL-M9100+BR-M9100 from Shimano
Based on a brake system that was already the benchmark for mountain bike brake systems, the SHIMANO engineers revised the design of the new brake levers (BL-M9100/9100). Both the clamp and the lever body itself have been modified. The clamp moves further towards the centre of the lever and is angled. As a result, the outer end of the reservoir is cleverly supported directly on the handlebars, creating an additional abutment when the lever is actuated. This significantly increases rigidity and stability, which ultimately leads to an even more direct braking feel and improved controllability.
The two-piston brake (BR-M9100) comes in combination with a lightweight XC brake lever, the reach of which can of course be individually adjusted. The two-piston brakes (BR-M9100) realise their immense potential in combination with a special SERVO-WAVE brake lever (BL-M9100), the reach of which can also be adjusted without tools and which also has an adjustment option for the free travel. Both brake callipers have a one-piece aluminium design and are combined with high-stiffness brake hoses, so that the new XTR brake systems score with a significantly faster response and less free travel.
The brake pads and brake discs have also been revised to match the newly developed brake calipers. Brake pads with cooling fins are used for the two-piston brakes. (N03/04A, resin/metal). In contrast, the pads without cooling fins (K02/04S, resin/metal; optional K02/04Ti with titanium backing plate) ensure good deceleration with low weight for the two-piston brakes. The design of the brake discs is a further development of the successful ICE TECHNOLOGIES FREEZA design. While the 140mm and 160mm discs are particularly attractive due to the further weight reduction of 5g and 10g respectively, the 180mm and 203mm versions are characterised by a further improvement in heat dissipation of 20°C in intensive tests and are also pleasantly low on the scales (203mm: minus 30g).
Features - Shimano XTR BL-M9100/BR-M9100 2-piston front disc brake
Shorter reaction times to brake actuation for continuous riding concentration
Greater flexibility and action-optimised cockpit layout
Updated brake lever shape
Seamless function
High strength
Powerful brake control
Faster brake response with shorter free travel
2-piston brake caliper
Brake calliper for post mount
Optimised, ergonomic 2-finger brake lever
SERVO-WAVE
One-way bleeding
Simple cable connection system (J-Kit)
I-Spec EV compatible - attachment of the shift lever to the brake lever for a clean, tidy cockpit
Matching brake disc RT-MT900 Center-Lock in 140, 160, 180, 203mm available separately!
Product features
Application: MTB, Enduro, Trail
Group: XTR M9100
Model: BR-M9100 (front wheel)
Brake type: Disc brake hydraulic
Brake lever: BL-M9100
Lever length: 2-finger
Mounting: left
Clamp: open
Mounting system: I-Spec EV (I-Spec EV is not compatible with I-Spec II and I-Spec B shifters!)
Adjustable pressure point: Yes
Grip width adjustment: Yes, without tools
Brake caliper: BR-M9100 (2-piston)
Brake calliper mount: Postmount
Brake pad: K05Ti Resin without cooling fins
Brake hose: SM-BH90
Cable connection: Straight brake lever / Banjo brake caliper
One-way bleeding: Yes
Brake fluid: Mineral oil
Recommended brake disc: RT-MT900
Cable length (select variant)
800mm
850mm
Material
Lever: Carbon
Brake caliper: Aluminium
Colour
Series color
Weight
from approx. 385g (front with 800mm cable, 160mm RT-MT900, without adapter, 2 bolts, resin brake pad)
Scope of delivery
1 x brake lever BL-M9100 left
1 x brake calliper BR-M9100 (2-piston)
1 x brake hose SM-BH90
1 x K05Ti Resin brake pads without cooling fins
2 x fixing screw for brake calliper
Brake is ready to install, filled and bled! (without original packaging)
Brake disc, adapter and olive + insert pin for shortening the cable are not included in the scope of delivery!
For matching brake disc >CLICK HERE<
For matching adapter >CLICK HERE<
XTR M9100
First impression XTR M9100
- Manufacturer number: KM9100KLFPRX080
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi
590-8577 Osaka
Japan
https://www.shimano.com
High Tech Campus 92
NL-5656 Eindhoven
Netherlands
[email protected]
https://www.shimano.com
Shimano XTR BL-M9100+BR-M9100 front disc brake TOP-DEAL
The hydraulic XTR BR-M9100 2-piston disc brake with BL-M9100 2-finger brake lever from Shimano fits seamlessly into the powerful line-up of the XTR M9100 groupset. The highlights: more braking power with less effort and an extremely linear response to the lever movement (without original packaging).
Stable 2-piston disc brake with super braking power: XTR BL-M9100+BR-M9100 from Shimano
Based on a brake system that was already the benchmark for mountain bike brake systems, the SHIMANO engineers revised the design of the new brake levers (BL-M9100/9100). Both the clamp and the lever body itself have been modified. The clamp moves further towards the centre of the lever and is angled. As a result, the outer end of the reservoir is cleverly supported directly on the handlebars, creating an additional abutment when the lever is actuated. This significantly increases rigidity and stability, which ultimately leads to an even more direct braking feel and improved controllability.
The two-piston brake (BR-M9100) comes in combination with a lightweight XC brake lever, the reach of which can of course be individually adjusted. The two-piston brakes (BR-M9100) realise their immense potential in combination with a special SERVO-WAVE brake lever (BL-M9100), the reach of which can also be adjusted without tools and which also has an adjustment option for the free travel. Both brake callipers have a one-piece aluminium design and are combined with high-stiffness brake hoses, so that the new XTR brake systems score with a significantly faster response and less free travel.
The brake pads and brake discs have also been revised to match the newly developed brake calipers. Brake pads with cooling fins are used for the two-piston brakes. (N03/04A, resin/metal). In contrast, the pads without cooling fins (K02/04S, resin/metal; optional K02/04Ti with titanium backing plate) ensure good deceleration with low weight for the two-piston brakes. The design of the brake discs is a further development of the successful ICE TECHNOLOGIES FREEZA design. While the 140mm and 160mm discs are particularly attractive due to the further weight reduction of 5g and 10g respectively, the 180mm and 203mm versions are characterised by a further improvement in heat dissipation of 20°C in intensive tests and are also pleasantly low on the scales (203mm: minus 30g).
Features - Shimano XTR BL-M9100/BR-M9100 2-piston front disc brake
Shorter reaction times to brake actuation for continuous riding concentration
Greater flexibility and action-optimised cockpit layout
Updated brake lever shape
Seamless function
High strength
Powerful brake control
Faster brake response with shorter free travel
2-piston brake caliper
Brake calliper for post mount
Optimised, ergonomic 2-finger brake lever
SERVO-WAVE
One-way bleeding
Simple cable connection system (J-Kit)
I-Spec EV compatible - attachment of the shift lever to the brake lever for a clean, tidy cockpit
Matching brake disc RT-MT900 Center-Lock in 140, 160, 180, 203mm available separately!
Product features
Application: MTB, Enduro, Trail
Group: XTR M9100
Model: BR-M9100 (front wheel)
Brake type: Disc brake hydraulic
Brake lever: BL-M9100
Lever length: 2-finger
Mounting: left
Clamp: open
Mounting system: I-Spec EV (I-Spec EV is not compatible with I-Spec II and I-Spec B shifters!)
Adjustable pressure point: Yes
Grip width adjustment: Yes, without tools
Brake caliper: BR-M9100 (2-piston)
Brake calliper mount: Postmount
Brake pad: K05Ti Resin without cooling fins
Brake hose: SM-BH90
Cable connection: Straight brake lever / Banjo brake caliper
One-way bleeding: Yes
Brake fluid: Mineral oil
Recommended brake disc: RT-MT900
Cable length (select variant)
800mm
850mm
Material
Lever: Carbon
Brake caliper: Aluminium
Colour
Series color
Weight
from approx. 385g (front with 800mm cable, 160mm RT-MT900, without adapter, 2 bolts, resin brake pad)
Scope of delivery
1 x brake lever BL-M9100 left
1 x brake calliper BR-M9100 (2-piston)
1 x brake hose SM-BH90
1 x K05Ti Resin brake pads without cooling fins
2 x fixing screw for brake calliper
Brake is ready to install, filled and bled! (without original packaging)
Brake disc, adapter and olive + insert pin for shortening the cable are not included in the scope of delivery!
For matching brake disc >CLICK HERE<
For matching adapter >CLICK HERE<
XTR M9100
First impression XTR M9100
- Manufacturer number: KM9100KLFPRX080
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi
590-8577 Osaka
Japan
https://www.shimano.com
High Tech Campus 92
NL-5656 Eindhoven
Netherlands
[email protected]
https://www.shimano.com
Material
neleCustomerReviews.detail.tabReview.info
Last viewed