Ergon GS3-S Evo grips
Product information "GS3-S Evo grips"
Optimum grip position and high-grip surface: Ergon GS3-S Evo
The GS series now has another grip option with the new compact bar end. The 3-finger composite GRP barend enables a comfortable second hand position, especially on longer MTB tours. The rubberized surfaces ensure a secure grip. Thanks to the newly designed inner core, installation is simple and secure, and the grips are also fully compatible with carbon handlebars.Features - Ergon GS3-S Evo
The large wing takes the pressure offErgon is once again setting new standards with the GS2-S Evo. Sporty bikers can finally look forward to an ergonomic grip with a pronounced wing. The pressure is distributed evenly and the wrist is optimally relieved, there are no constrictions and the sensitive ulnar nerve is protected. Numb fingers and aching hands are now a thing of the past.
The pain preventer
If the wrist is bent too much when cycling, the carpal tunnel can become trapped. The result: burning pain in the hand or forearm - known as carpal tunnel syndrome. This is exactly what the GS2 prevents: the wing, which is perfectly adapted to the hand with an anatomical metacarpal curvature, ensures an almost complete form fit between the hand and the grip. high pressure is distributed evenly across this large surface, relieving the carpal tunnel and preventing pain.
New ergonomic formula for full control
Thumb, fingers, middle hand: these three gripping zones allow you to hold your bike in your hand while riding. The GS2 has special texture fields for each of these zones, which are optimally adapted to the ergonomics of the hand - for full control and a high level of safety.
A grip as dynamic as you are
The GS2-S Evo is ergonomically optimized for sporty touring and fitness rides and has a newly defined rubber hardness. It has slightly less volume than Ergon's global bestseller GP1 - and is therefore also ideally suited for dynamic grip positions such as when pedaling in an uphill position.
Thick or thin - suitable for every hand
Ergon offers two different sizes so that the GS2-S Evo fits perfectly in the hand. The difference between "Small" and "Large" lies in the grip width. A larger hand has more grip on a thicker handle than on a thinner one. Accordingly, a thinner grip fits better in a small hand. The "Small" size is recommended for hand (shoe) sizes 6.5 - 8.5 and the "Large" size for 8.5 - 10.5.
Ergonomic 3-finger bar end with non-slip grip
The 3-finger bar end made of non-slip rubber offers maximum comfort in the grip position thanks to its individual angle adjustment. This allows the grip to be optimally adapted to the hand position, which ensures greater safety and a pleasant riding experience on long tours.
Product features
- Area of use: Fitness, touring, MTB touring, e-touring
- Name: Ergon GS3-S Evo
- Handlebar diameter: Ø 22.2 mm
Material
- Glass Fiber Composite with rubberized grip surface
Color
- black
Size
- small
Weight (manufacturer information)
- 240 g
Scope of delivery
- 1 pair of Ergon GS3-S Evo grips
Technologies
Highest quality, short distances, more sustainability
Design, development, production - everything about the GS3 Evo is "Made in Germany". This guarantees the highest standards across all manufacturing processes: maximum product quality, short transportation routes, fast delivery times and secure supply chains. By sourcing all raw materials from Germany and using almost exclusively recycled plastics, we also contribute to increased sustainability and produce virtually waste-free.
Grip rubber made in Germany
The material of the Ergon grips meets the highest quality standards, is TÜV-certified, durable and unique worldwide, using only medical white oil as a plasticizer. The UV-stable Longlife rubber compound is developed and manufactured exclusively for Ergon in Germany. Ergonomics, product design and engineering - all made in Germany.
Always clamps, and that's a good thing
The GP series clamping system is extremely secure and easy to install. Each handle is fixed with just one screw and is thus reliably protected against twisting. Also important: Ergon aluminum clamps are forged and not pressed. The GP3 and other GP models with our super-light, flexible bar ends made of glass-fiber composite with grippy rubber inlays provide you with additional gripping positions.
It's all in the mix
Minimal friction - maximum comfort: The super-soft, UV-stable Longlife rubber compound developed by Ergon offers reliable grip when cycling with its texture fields, lies comfortably in the hand and noticeably increases riding enjoyment.
Fits every gear type
Some models in the GP series, including the GP2, are available in special versions for different gear systems. Both grips are the same length for regular gears. The version for Gripshift® or Dual-Twist-Shift twist shifters includes two shortened grips, for Rohloff®, Nexus® and Single-Twist-Shift only the grip on the right-hand side is shortened.
From the original wing grip to the GP2 Evo
The Ergon GP1 has been the reference for bicycle wing grips for 20 years. Proven millions of times over, the global bestseller has won countless tests and awards. But that was not enough for Ergon. They have continuously improved the original for touring and fitness riders in terms of function, materials and workmanship and are now setting a new milestone with the Evo version. More ergonomics is not possible.
- Manufacturer number: 42416032
- EAN: 4260477078018
Am Autobahnkreuz 7
56072 Koblenz
Deutschland
https://www.ergonbike.com/de/
Ergon GS3-S Evo grips
Optimum grip position and high-grip surface: Ergon GS3-S Evo
The GS series now has another grip option with the new compact bar end. The 3-finger composite GRP barend enables a comfortable second hand position, especially on longer MTB tours. The rubberized surfaces ensure a secure grip. Thanks to the newly designed inner core, installation is simple and secure, and the grips are also fully compatible with carbon handlebars.Features - Ergon GS3-S Evo
The large wing takes the pressure offErgon is once again setting new standards with the GS2-S Evo. Sporty bikers can finally look forward to an ergonomic grip with a pronounced wing. The pressure is distributed evenly and the wrist is optimally relieved, there are no constrictions and the sensitive ulnar nerve is protected. Numb fingers and aching hands are now a thing of the past.
The pain preventer
If the wrist is bent too much when cycling, the carpal tunnel can become trapped. The result: burning pain in the hand or forearm - known as carpal tunnel syndrome. This is exactly what the GS2 prevents: the wing, which is perfectly adapted to the hand with an anatomical metacarpal curvature, ensures an almost complete form fit between the hand and the grip. high pressure is distributed evenly across this large surface, relieving the carpal tunnel and preventing pain.
New ergonomic formula for full control
Thumb, fingers, middle hand: these three gripping zones allow you to hold your bike in your hand while riding. The GS2 has special texture fields for each of these zones, which are optimally adapted to the ergonomics of the hand - for full control and a high level of safety.
A grip as dynamic as you are
The GS2-S Evo is ergonomically optimized for sporty touring and fitness rides and has a newly defined rubber hardness. It has slightly less volume than Ergon's global bestseller GP1 - and is therefore also ideally suited for dynamic grip positions such as when pedaling in an uphill position.
Thick or thin - suitable for every hand
Ergon offers two different sizes so that the GS2-S Evo fits perfectly in the hand. The difference between "Small" and "Large" lies in the grip width. A larger hand has more grip on a thicker handle than on a thinner one. Accordingly, a thinner grip fits better in a small hand. The "Small" size is recommended for hand (shoe) sizes 6.5 - 8.5 and the "Large" size for 8.5 - 10.5.
Ergonomic 3-finger bar end with non-slip grip
The 3-finger bar end made of non-slip rubber offers maximum comfort in the grip position thanks to its individual angle adjustment. This allows the grip to be optimally adapted to the hand position, which ensures greater safety and a pleasant riding experience on long tours.
Product features
- Area of use: Fitness, touring, MTB touring, e-touring
- Name: Ergon GS3-S Evo
- Handlebar diameter: Ø 22.2 mm
Material
- Glass Fiber Composite with rubberized grip surface
Color
- black
Size
- small
Weight (manufacturer information)
- 240 g
Scope of delivery
- 1 pair of Ergon GS3-S Evo grips
Technologies
Highest quality, short distances, more sustainability
Design, development, production - everything about the GS3 Evo is "Made in Germany". This guarantees the highest standards across all manufacturing processes: maximum product quality, short transportation routes, fast delivery times and secure supply chains. By sourcing all raw materials from Germany and using almost exclusively recycled plastics, we also contribute to increased sustainability and produce virtually waste-free.
Grip rubber made in Germany
The material of the Ergon grips meets the highest quality standards, is TÜV-certified, durable and unique worldwide, using only medical white oil as a plasticizer. The UV-stable Longlife rubber compound is developed and manufactured exclusively for Ergon in Germany. Ergonomics, product design and engineering - all made in Germany.
Always clamps, and that's a good thing
The GP series clamping system is extremely secure and easy to install. Each handle is fixed with just one screw and is thus reliably protected against twisting. Also important: Ergon aluminum clamps are forged and not pressed. The GP3 and other GP models with our super-light, flexible bar ends made of glass-fiber composite with grippy rubber inlays provide you with additional gripping positions.
It's all in the mix
Minimal friction - maximum comfort: The super-soft, UV-stable Longlife rubber compound developed by Ergon offers reliable grip when cycling with its texture fields, lies comfortably in the hand and noticeably increases riding enjoyment.
Fits every gear type
Some models in the GP series, including the GP2, are available in special versions for different gear systems. Both grips are the same length for regular gears. The version for Gripshift® or Dual-Twist-Shift twist shifters includes two shortened grips, for Rohloff®, Nexus® and Single-Twist-Shift only the grip on the right-hand side is shortened.
From the original wing grip to the GP2 Evo
The Ergon GP1 has been the reference for bicycle wing grips for 20 years. Proven millions of times over, the global bestseller has won countless tests and awards. But that was not enough for Ergon. They have continuously improved the original for touring and fitness riders in terms of function, materials and workmanship and are now setting a new milestone with the Evo version. More ergonomics is not possible.
- Manufacturer number: 42416032
- EAN: 4260477078018
Am Autobahnkreuz 7
56072 Koblenz
Deutschland
https://www.ergonbike.com/de/
neleCustomerReviews.detail.tabReview.info
Last viewed