Katana WS-15 Workshop Set
Product information "WS-15 Workshop Set"
Scope of delivery
- Katana/Radon WS-15 workshop set
- 1 x Radon Comp torque wrench
- 1 x Katana PRO-Blow floor pump
- 1 x Katana TC-2 tool case
Radon Comp torque wrench
The attractively and sturdily designed torque wrench from Radon is a must-have in every workshop. Thanks to the easy-to-read scale, the correct setting is child's play. The practical soft box protects the ratchet and the total of nine attachments, and there is also a Velcro pocket inside for small parts.
Radon equips your bike workshop
Torque wrenches are precision tools that enable bolted connections to be tightened with the exact force recommended or specified by the manufacturer. The correct torque, which is specified in Newton meters (Nm), is particularly important for carbon frames and add-on parts. However, the correct tightening torque also ensures that the screw connection is not overloaded for all other materials.
IMPORTANT NOTE: Torque wrenches are not suitable for loosening screw connections, neither in left-hand nor right-hand rotation (screws with left-hand threads are rare, but they do exist → e.g. the left pedal!) Loosening screw connections destroys the sensitive mechanics of the torque wrench. The measuring accuracy is then no longer guaranteed. Improper storage can also affect the accuracy. A torque wrench must always be stored in a relaxed state, i.e. at the lowest adjustable value!
And another important tip at this point: Before using it for the first time, the entire working range of the torque wrench should be turned up two to three times and returned to the zero position. This allows the special grease to spread effectively and reach all relevant points in the mechanism.
Product features
- Torque release: right (generates a tactile and audible release signal when the set torque value is reached)
- Setting range: 2 - 24 Nm
- Measuring steps: 0.2 Nm
- Deviation from measured value: +-4%
- Socket: 1/4"
- Length: 220 mm
Bit selection
- Hexagon socket attachments:
- 3 mm
- 4 mm
- 5 mm
- 6 mm
- 8 mm
- 10 mm
- Torx attachments:
- T25
- T30
- Cross recess: #2
Material
- Tool steel
- Plastic
Radon Comp: high-quality bicycle tools
Bicycle tools are special tools - but they don't have to be expensive if they are of good quality. Radon Comp offers reliable and robust tools for use on all types of bicycles. Radon Comp tools were created for the ambitious hobby mechanic and are designed for occasional to regular, but not permanent, use.
Katana Pro-Blow floor pump
Stable, precise and compatible: the Katana Pro-Blow floor pump with Air-Bleeder guarantees full pressure control thanks to the air release function. The fact that the on-top pressure gauge and the cylinder/foot combination are made of tempered steel makes the air pump particularly durable and user-friendly. The air pump creates up to 160 PSI / 11 bar and is suitable for Schrader, Presta and Dunlop valves thanks to its double valve head.Features
- Top-mounted gauge for easy reading
- Double pump head with aluminum thumb lever and air release button
- For all types of valves (Presta, Schrader, Dunlop)
- High-strength pressure cylinder
- Sturdy steel base with large stand
- Extra-large anti-slip cover on the base
- Long pump hose with locking bracket
- Ergonomic T-handle
Product features
- Material: steel/plastic
- Height: 680 mm
- Max. Air pressure: 160 PSI / 11 bar
Color
- gray/black
Weight
- 1690 g (manufacturer's specification)
Katana TC-2 tool case
The Katana TC-2 tool case is equipped with all the tools you need to maintain and repair your bike. 27 parts and 41 functions ensure unadulterated tinkering fun. Comes in a functional shell case with metal hinges.
Contents
- Mini chain lock pliers 2 in 1 Closer and Opener (with magnetic holder for chain lock links)
- Chain rivet pusher up to 11-speed (incl. spare rivet pin)
- Chain gauge
- 5mm Phillips screwdriver
- Slotted screwdriver
- Dust cap wrench
- Chainring wrench (9mm and 10mm open-end wrench with 2 and 3-pin side)
- Tire levers (pair)
- Allen key set (2, 2.5, 3, 4, 5, 6)
- Hub cone wrench
- 13mm
- 14mm
- 15mm
- 16mm
- Pedal wrench (15 mm, ring wrench 14/15 mm)
- Hexagon socket wrench 8mm with adapter to 1/2" drive
- Spoke wrench
- 0.127''
- 0.130''
- 0.136''
- Puller for cassettes and brake disks HG with pin 1/2"/24mm
- Bottom bracket wrench for Hollowtech II
- Chain whip up to 11-speed
- Crank puller for square & Octalink
- Bottom bracket wrench for cartridge bearings 1/2"/24mm
- 3mm flat screwdriver
- Multi-tooth wrench T25
- Repair kit for chain and inner tube:
- 3 chain locks (9-/10-/11-speed)
- Repair kit with 6 self-adhesive patches and sandpaper
Manufacturer 1:
Katana-Europe - Robert Zeggel
Lenderichstr. 14
44379 Dortmund
Dortmund, Germany
Manufacturer 2:
H & S Bike Discount GmbH
Konrad-Zuse-Straße 20
53501 Grafschaft
Germany
www.bike-discount.de
Lenderichstr. 14
44379 Dortmund
Deutschland
[email protected]
Katana WS-15 Workshop Set
Scope of delivery
- Katana/Radon WS-15 workshop set
- 1 x Radon Comp torque wrench
- 1 x Katana PRO-Blow floor pump
- 1 x Katana TC-2 tool case
Radon Comp torque wrench
The attractively and sturdily designed torque wrench from Radon is a must-have in every workshop. Thanks to the easy-to-read scale, the correct setting is child's play. The practical soft box protects the ratchet and the total of nine attachments, and there is also a Velcro pocket inside for small parts.
Radon equips your bike workshop
Torque wrenches are precision tools that enable bolted connections to be tightened with the exact force recommended or specified by the manufacturer. The correct torque, which is specified in Newton meters (Nm), is particularly important for carbon frames and add-on parts. However, the correct tightening torque also ensures that the screw connection is not overloaded for all other materials.
IMPORTANT NOTE: Torque wrenches are not suitable for loosening screw connections, neither in left-hand nor right-hand rotation (screws with left-hand threads are rare, but they do exist → e.g. the left pedal!) Loosening screw connections destroys the sensitive mechanics of the torque wrench. The measuring accuracy is then no longer guaranteed. Improper storage can also affect the accuracy. A torque wrench must always be stored in a relaxed state, i.e. at the lowest adjustable value!
And another important tip at this point: Before using it for the first time, the entire working range of the torque wrench should be turned up two to three times and returned to the zero position. This allows the special grease to spread effectively and reach all relevant points in the mechanism.
Product features
- Torque release: right (generates a tactile and audible release signal when the set torque value is reached)
- Setting range: 2 - 24 Nm
- Measuring steps: 0.2 Nm
- Deviation from measured value: +-4%
- Socket: 1/4"
- Length: 220 mm
Bit selection
- Hexagon socket attachments:
- 3 mm
- 4 mm
- 5 mm
- 6 mm
- 8 mm
- 10 mm
- Torx attachments:
- T25
- T30
- Cross recess: #2
Material
- Tool steel
- Plastic
Radon Comp: high-quality bicycle tools
Bicycle tools are special tools - but they don't have to be expensive if they are of good quality. Radon Comp offers reliable and robust tools for use on all types of bicycles. Radon Comp tools were created for the ambitious hobby mechanic and are designed for occasional to regular, but not permanent, use.
Katana Pro-Blow floor pump
Stable, precise and compatible: the Katana Pro-Blow floor pump with Air-Bleeder guarantees full pressure control thanks to the air release function. The fact that the on-top pressure gauge and the cylinder/foot combination are made of tempered steel makes the air pump particularly durable and user-friendly. The air pump creates up to 160 PSI / 11 bar and is suitable for Schrader, Presta and Dunlop valves thanks to its double valve head.Features
- Top-mounted gauge for easy reading
- Double pump head with aluminum thumb lever and air release button
- For all types of valves (Presta, Schrader, Dunlop)
- High-strength pressure cylinder
- Sturdy steel base with large stand
- Extra-large anti-slip cover on the base
- Long pump hose with locking bracket
- Ergonomic T-handle
Product features
- Material: steel/plastic
- Height: 680 mm
- Max. Air pressure: 160 PSI / 11 bar
Color
- gray/black
Weight
- 1690 g (manufacturer's specification)
Katana TC-2 tool case
The Katana TC-2 tool case is equipped with all the tools you need to maintain and repair your bike. 27 parts and 41 functions ensure unadulterated tinkering fun. Comes in a functional shell case with metal hinges.
Contents
- Mini chain lock pliers 2 in 1 Closer and Opener (with magnetic holder for chain lock links)
- Chain rivet pusher up to 11-speed (incl. spare rivet pin)
- Chain gauge
- 5mm Phillips screwdriver
- Slotted screwdriver
- Dust cap wrench
- Chainring wrench (9mm and 10mm open-end wrench with 2 and 3-pin side)
- Tire levers (pair)
- Allen key set (2, 2.5, 3, 4, 5, 6)
- Hub cone wrench
- 13mm
- 14mm
- 15mm
- 16mm
- Pedal wrench (15 mm, ring wrench 14/15 mm)
- Hexagon socket wrench 8mm with adapter to 1/2" drive
- Spoke wrench
- 0.127''
- 0.130''
- 0.136''
- Puller for cassettes and brake disks HG with pin 1/2"/24mm
- Bottom bracket wrench for Hollowtech II
- Chain whip up to 11-speed
- Crank puller for square & Octalink
- Bottom bracket wrench for cartridge bearings 1/2"/24mm
- 3mm flat screwdriver
- Multi-tooth wrench T25
- Repair kit for chain and inner tube:
- 3 chain locks (9-/10-/11-speed)
- Repair kit with 6 self-adhesive patches and sandpaper
Manufacturer 1:
Katana-Europe - Robert Zeggel
Lenderichstr. 14
44379 Dortmund
Dortmund, Germany
Manufacturer 2:
H & S Bike Discount GmbH
Konrad-Zuse-Straße 20
53501 Grafschaft
Germany
www.bike-discount.de
Lenderichstr. 14
44379 Dortmund
Deutschland
[email protected]
neleCustomerReviews.detail.tabReview.info
Last viewed