Reverse Components Stem Black-ONE D-2 Titanium
Product information "Stem Black-ONE D-2 Titanium"
The D-2 Titanium has the same design as the D-2 stem with additional precision machining, a silver finish and titanium bolts, reducing the weight to a low 127 g while maintaining strength at full load capacity.
The intelligent no-gap clamping design in the bottom ensure no pinch points, and equal clamping force for safety and stability. Because the most loads and notching effects are always at the bottom of the handlebar. And our smooth no-gap surface enlarges the lifetime of your handlebars.
Features - Reverse Components Black-ONE D-2 Titanium stem
- Enduro stem that is suitable for 31.8 mm and 35 mm handlebar diameter
- With the help of the enclosed reducing sleeve, the clamping area can be easily adjusted without losing stability
- The reducing sleeve provides a wide, smooth clamping area, which is also ideal for use with carbon handlebars
- The E-Black One D-2 Titanium stem was tested in the EFBE test laboratory according to the "EFBE EPAC MTB-GR Tri-Test", which is one of the toughest test procedures in the world, and passed all stresses without any problems!
- Micro adjustment lines for better orientation when aligning the handlebars
Product features
- Use: MTB, Enduro
- Length: 35 mm
- Handlebar clamping: Ø31,8 mm & Ø35 mm
- Rise: 8°
- Clamp width: 50 mm
- Height: 40 mm
- Head tube: Ø1 1/8"
- Allowable total weight: 130 kg
- E-Safety level: Category 5 (maximum)
Material
- Aluminium 6061 T6
Color
- silver
Weight (manufacturer information)
- 127 g (+/- 5 % weight tolerance)
Scope of delivery
- 1 x Reverse Components Black-ONE D-2 Titanium stem
- 1 x Reducer shim
- 1 x Top Cap with screw & claw
- Manufacturer number: 01637
- EAN: 4717480168651
Rudolf-Diesel-Strasse 13
72250 Freudenstadt
Deutschland
[email protected]
https://reverse-components.com/de
Reverse Components Stem Black-ONE D-2 Titanium
The D-2 Titanium has the same design as the D-2 stem with additional precision machining, a silver finish and titanium bolts, reducing the weight to a low 127 g while maintaining strength at full load capacity.
The intelligent no-gap clamping design in the bottom ensure no pinch points, and equal clamping force for safety and stability. Because the most loads and notching effects are always at the bottom of the handlebar. And our smooth no-gap surface enlarges the lifetime of your handlebars.
Features - Reverse Components Black-ONE D-2 Titanium stem
- Enduro stem that is suitable for 31.8 mm and 35 mm handlebar diameter
- With the help of the enclosed reducing sleeve, the clamping area can be easily adjusted without losing stability
- The reducing sleeve provides a wide, smooth clamping area, which is also ideal for use with carbon handlebars
- The E-Black One D-2 Titanium stem was tested in the EFBE test laboratory according to the "EFBE EPAC MTB-GR Tri-Test", which is one of the toughest test procedures in the world, and passed all stresses without any problems!
- Micro adjustment lines for better orientation when aligning the handlebars
Product features
- Use: MTB, Enduro
- Length: 35 mm
- Handlebar clamping: Ø31,8 mm & Ø35 mm
- Rise: 8°
- Clamp width: 50 mm
- Height: 40 mm
- Head tube: Ø1 1/8"
- Allowable total weight: 130 kg
- E-Safety level: Category 5 (maximum)
Material
- Aluminium 6061 T6
Color
- silver
Weight (manufacturer information)
- 127 g (+/- 5 % weight tolerance)
Scope of delivery
- 1 x Reverse Components Black-ONE D-2 Titanium stem
- 1 x Reducer shim
- 1 x Top Cap with screw & claw
- Manufacturer number: 01637
- EAN: 4717480168651
Rudolf-Diesel-Strasse 13
72250 Freudenstadt
Deutschland
[email protected]
https://reverse-components.com/de
neleCustomerReviews.detail.tabReview.info
Last viewed