SDG Tellis V2 31.6mm Dropper Post
Item no:
20146995
Product information "Tellis V2 31.6mm Dropper Post"
Hoch und runter kann jeder – bei der SDG Tellis Dropper verfolgten die Ingenieure den Anspruch, es einfach und robust zu halten, um eine erhöhte Zuverlässigkeit zu erlangen. Die ursprüngliche Tellis Dropper Post wurde als zuverlässiges Arbeitstier entwickelt. Die Tellis V2 ist eine verbesserte Version dieser Variostütze. Nach sechs Jahren voller Fahrerfeedback, Tests und kontinuierlicher Optimierung ist die V2 das Ergebnis dieser Weiterentwicklung. Sie bietet eine noch bessere Performance und sorgt für ein erstklassiges Fahrerlebnis auf den Trails.
Stability meets innovation and reliability: TELLIS V2 Dropper Post from SDG
The Tellis V2 Dropper Post combines durability, simplicity, and advanced design. Built with IGUS bushings, a sealed Wintek cartridge, and a Trelleborg main seal, it virtually eliminates maintenance issues. Fewer moving parts mean reduced chances of failure.
The new version features a patented flatter head (-10 mm headroom), side-access bolts and a stronger 26 mm sliding tube diameter for improved rigidity and durability. Improved copper bearings in the polycarbonate guide system ensure longevity and prevent play, while the stroke remains smooth.
Included 5, 10, and 20 mm travel adjustment shims allow riders to fine-tune the drop height for a perfect fit.
Features - SDG Tellis Dropper Post 31.6mm Vario seatpost
- Hydraulic telescopic seatpost with mechanical stealth cable routing
- revised seat clamp with reduced height (10mm less)
- Micro Adjust design with easily accessible side bolts
- New 3D forged head, reinforced with robust 26mm stanchion tube upper section
- Self-lubricating IGUS bushing
- Intelligent PTFE and copper wedge system to minimize head play and increase shear strength
- Incl. reducing height compensation washers (5mm, 10mm, 20mm)
- Infinitely variable adjustment range: 75, 100, 125, 150, 170, 200, 230mm
- Closed hydraulic cartridge
- Anodized, scratch-resistant post body with lasered markings for easier saddle height adjustment
- Quick-Connect mechanism for simplified cable pull assembly
- Reduced overlap design (10mm) on the 200mm and 230mm travel options
- Suitable for cold weather: tested down to -20 degrees Celsius
Product features
- Use: MTB All Mountain, Enduro
- Diameter. 31.6mm
- Travel: 100 / 125 / 150 / 170 / 200 / 230mm (choose variant)
- Offset: 0mm
- Type: Handlebar remote (mechanical)
- Cable routing: Internal
- Saddle clamp: 2-bolt
- Seat rail clamp: 7 x 7mm
- Dimensions:
- Distance collar to bottom / Min. Einstecktiefe:
- 31.6 x 100mm / 352,5mm: 206 mm / 103 mm
- 31.6 x 125mm / 402,5mm: 231 mm / 103 mm
- 31.6 x 150mm / 452,5mm: 256 mm / 103 mm
- 31.6 x 170 mm / 492,5mm: 276 mm / 143 mm
- 31.6 x 200 mm / 552,5mm: 306 mm / 143 mm
- 31.6 x 230 mm / 612,5mm: 336 mm / 173 mm
- Distance collar to bottom / Min. Einstecktiefe:
Version (choose variant)
- 31.6 x 100mm / 352.5mm
- 31.6 x 125mm / 402.5mm
- 31.6 x 150mm / 452.5mm
- 31.6 x 170 mm / 492.5mm
- 31.6 x 200 mm / 552.5mm
- 31.6 x 230 mm / 612.5mm
Material
- Seat post: Aluminum
- Remote lever: Aluminum
Color
- black
Weight (manufacturer information)
- 31.6 x 100mm: 481g
- 31.6 x 125mm: 525g
- 31.6 x 150mm: 569g
- 31.6 x 170 mm: 589g
- 31.6 x 200 mm: 640g
- 31.6 x 230 mm: 691g
Scope of delivery
- 1 SDG Tellis Tellis V2 Dropper 31.6mm Seatpost
Handlebar remote lever, shift cable and outer housing not included!
Explore the Tellis V2 - our workhorse dropper post elevated!
Introducing the technical features on the new Tellis V2 MTB dropper post.
Tellis V2 Dropper Post technical details
2024 sdgcomponents long video v2 002
How to install a saddle on an Sdg Tellis V2 MTB dropper post.
How to install travel reduction shims on Sdg Tellis V2 MTB dropper post.
How to replace an oil cartridge on a Tellis V2 MTB dropper post.
- Manufacturer number: SPT2316100AM
- UPC: 812367018556
Manufacturer:
SDG Components, Inc.17451 Nichols Ln. Unit H
92647 Huntington Beach CA
United States
[email protected]
https://www.sdgcomponents.com
Person responsible in the EU:
Cosmic Sports GmbHLeyher Str.47
90763 Fürth
Deutschland
[email protected]
https://www.cosmicsports.de
SDG Tellis V2 31.6mm Dropper Post
Hoch und runter kann jeder – bei der SDG Tellis Dropper verfolgten die Ingenieure den Anspruch, es einfach und robust zu halten, um eine erhöhte Zuverlässigkeit zu erlangen. Die ursprüngliche Tellis Dropper Post wurde als zuverlässiges Arbeitstier entwickelt. Die Tellis V2 ist eine verbesserte Version dieser Variostütze. Nach sechs Jahren voller Fahrerfeedback, Tests und kontinuierlicher Optimierung ist die V2 das Ergebnis dieser Weiterentwicklung. Sie bietet eine noch bessere Performance und sorgt für ein erstklassiges Fahrerlebnis auf den Trails.
Stability meets innovation and reliability: TELLIS V2 Dropper Post from SDG
The Tellis V2 Dropper Post combines durability, simplicity, and advanced design. Built with IGUS bushings, a sealed Wintek cartridge, and a Trelleborg main seal, it virtually eliminates maintenance issues. Fewer moving parts mean reduced chances of failure.
The new version features a patented flatter head (-10 mm headroom), side-access bolts and a stronger 26 mm sliding tube diameter for improved rigidity and durability. Improved copper bearings in the polycarbonate guide system ensure longevity and prevent play, while the stroke remains smooth.
Included 5, 10, and 20 mm travel adjustment shims allow riders to fine-tune the drop height for a perfect fit.
Features - SDG Tellis Dropper Post 31.6mm Vario seatpost
- Hydraulic telescopic seatpost with mechanical stealth cable routing
- revised seat clamp with reduced height (10mm less)
- Micro Adjust design with easily accessible side bolts
- New 3D forged head, reinforced with robust 26mm stanchion tube upper section
- Self-lubricating IGUS bushing
- Intelligent PTFE and copper wedge system to minimize head play and increase shear strength
- Incl. reducing height compensation washers (5mm, 10mm, 20mm)
- Infinitely variable adjustment range: 75, 100, 125, 150, 170, 200, 230mm
- Closed hydraulic cartridge
- Anodized, scratch-resistant post body with lasered markings for easier saddle height adjustment
- Quick-Connect mechanism for simplified cable pull assembly
- Reduced overlap design (10mm) on the 200mm and 230mm travel options
- Suitable for cold weather: tested down to -20 degrees Celsius
Product features
- Use: MTB All Mountain, Enduro
- Diameter. 31.6mm
- Travel: 100 / 125 / 150 / 170 / 200 / 230mm (choose variant)
- Offset: 0mm
- Type: Handlebar remote (mechanical)
- Cable routing: Internal
- Saddle clamp: 2-bolt
- Seat rail clamp: 7 x 7mm
- Dimensions:
- Distance collar to bottom / Min. Einstecktiefe:
- 31.6 x 100mm / 352,5mm: 206 mm / 103 mm
- 31.6 x 125mm / 402,5mm: 231 mm / 103 mm
- 31.6 x 150mm / 452,5mm: 256 mm / 103 mm
- 31.6 x 170 mm / 492,5mm: 276 mm / 143 mm
- 31.6 x 200 mm / 552,5mm: 306 mm / 143 mm
- 31.6 x 230 mm / 612,5mm: 336 mm / 173 mm
- Distance collar to bottom / Min. Einstecktiefe:
Version (choose variant)
- 31.6 x 100mm / 352.5mm
- 31.6 x 125mm / 402.5mm
- 31.6 x 150mm / 452.5mm
- 31.6 x 170 mm / 492.5mm
- 31.6 x 200 mm / 552.5mm
- 31.6 x 230 mm / 612.5mm
Material
- Seat post: Aluminum
- Remote lever: Aluminum
Color
- black
Weight (manufacturer information)
- 31.6 x 100mm: 481g
- 31.6 x 125mm: 525g
- 31.6 x 150mm: 569g
- 31.6 x 170 mm: 589g
- 31.6 x 200 mm: 640g
- 31.6 x 230 mm: 691g
Scope of delivery
- 1 SDG Tellis Tellis V2 Dropper 31.6mm Seatpost
Handlebar remote lever, shift cable and outer housing not included!
Explore the Tellis V2 - our workhorse dropper post elevated!
Introducing the technical features on the new Tellis V2 MTB dropper post.
Tellis V2 Dropper Post technical details
2024 sdgcomponents long video v2 002
How to install a saddle on an Sdg Tellis V2 MTB dropper post.
How to install travel reduction shims on Sdg Tellis V2 MTB dropper post.
How to replace an oil cartridge on a Tellis V2 MTB dropper post.
- Manufacturer number: SPT2316100AM
- UPC: 812367018556
Manufacturer:
SDG Components, Inc.17451 Nichols Ln. Unit H
92647 Huntington Beach CA
United States
[email protected]
https://www.sdgcomponents.com
Person responsible in the EU:
Cosmic Sports GmbHLeyher Str.47
90763 Fürth
Deutschland
[email protected]
https://www.cosmicsports.de
Evaluations
Login
neleCustomerReviews.detail.tabReview.info
Last viewed