Pomiń galerię produktów
UVP*
56,00 €
49,99 €
Zawartość 0.25 l (199,96 € / 1 l)
Rohloff z małym pierścieniem zabezpieczającym typu „Snap Ring” Splined Carrier Adapter
Numer produktu:
20043523
Informacje dot. produktu "z małym pierścieniem zabezpieczającym typu „Snap Ring” Splined Carrier Adapter"
It is possible to retrofit the new splines sprocket system to every Rohloff SPEEDHUB 500/14 transmission. One must simply remove the old, worn sprocket using a chainwhip and our special sprocket remover tool.
To exclude an overload of the gearbox, a minimum chain ratio (factor 1.9) must not be undercut for safety reasons. The smallest permissible chain ratios for solo riders up to max 100 kg are: 40/21, 36/19, 34/18, 32/17, 30/16, 28/15, 26/14 and 26/13 = factor ~ 1.9.
For tandem use or persons over 100 kg body weight, the following chainring/pinion tooth combinations (factor = 2.5) must not be undercut: 34/13, 35/14, 38/15, 40/16, 42/17, 45/18, 48/19, 52/21.
ATTENTION
For the combination of plug-in sprocket with chain tensioner, a long fixing bolt with washers must be used to adjust to chainline 58mm.
The use of a closed chain guard (Hebie, etc.) must be individually checked for compatibility. In no case may the rotating hub shell or the splined carrier come into contact with the chain guard or drag along!
For special cases where an adjustment of the chainline is not possible (eg special chain case, chain in the rear running, collision with chain stay due to unusually narrow installation space) we offer the Splined Carrier S (Art.Nr. 8540S) for chainline 55mm. This is to be used exclusively for pinion 15Z-19 + 21Z and is not compatible with pinion 13Z + 14Z and not suitable for Gates pulleys.
Features
- All Rohloff sprockets are reversible and designed for a chainline of 55mm (position like large chainring on 3-speed Shimano cranks)
- Due to the extended number of teeth in the pinion, more chainring / sprocket combinations result
Material
- Stainless steel
Weight
- 38g
Scope of delivery
- 1 Rohloff Splined Carrier pinion adapter with circlip narrow
Recommendation
For everyday use, a gear ratio of factor approx. 2.5 - 2.8 has proven to be common. For off-road use of the SPEEDHUB in 29er/27.5" MTB or Fatbikes a very light mountain gear is desired -> which can be achieved with a smaller factor of up to 1.9.To exclude an overload of the gearbox, a minimum chain ratio (factor 1.9) must not be undercut for safety reasons. The smallest permissible chain ratios for solo riders up to max 100 kg are: 40/21, 36/19, 34/18, 32/17, 30/16, 28/15, 26/14 and 26/13 = factor ~ 1.9.
For tandem use or persons over 100 kg body weight, the following chainring/pinion tooth combinations (factor = 2.5) must not be undercut: 34/13, 35/14, 38/15, 40/16, 42/17, 45/18, 48/19, 52/21.
ATTENTION
For the combination of plug-in sprocket with chain tensioner, a long fixing bolt with washers must be used to adjust to chainline 58mm.
The use of a closed chain guard (Hebie, etc.) must be individually checked for compatibility. In no case may the rotating hub shell or the splined carrier come into contact with the chain guard or drag along!
For special cases where an adjustment of the chainline is not possible (eg special chain case, chain in the rear running, collision with chain stay due to unusually narrow installation space) we offer the Splined Carrier S (Art.Nr. 8540S) for chainline 55mm. This is to be used exclusively for pinion 15Z-19 + 21Z and is not compatible with pinion 13Z + 14Z and not suitable for Gates pulleys.
- Numer producenta: 8540S
- EAN: 4250307407422
Producent:
Rohloff AGMönchswiese 11
34233 Fuldatal
Deutschland
[email protected]
www.rohloff.de/de/
Rohloff z małym pierścieniem zabezpieczającym typu „Snap Ring” Splined Carrier Adapter
It is possible to retrofit the new splines sprocket system to every Rohloff SPEEDHUB 500/14 transmission. One must simply remove the old, worn sprocket using a chainwhip and our special sprocket remover tool.
To exclude an overload of the gearbox, a minimum chain ratio (factor 1.9) must not be undercut for safety reasons. The smallest permissible chain ratios for solo riders up to max 100 kg are: 40/21, 36/19, 34/18, 32/17, 30/16, 28/15, 26/14 and 26/13 = factor ~ 1.9.
For tandem use or persons over 100 kg body weight, the following chainring/pinion tooth combinations (factor = 2.5) must not be undercut: 34/13, 35/14, 38/15, 40/16, 42/17, 45/18, 48/19, 52/21.
ATTENTION
For the combination of plug-in sprocket with chain tensioner, a long fixing bolt with washers must be used to adjust to chainline 58mm.
The use of a closed chain guard (Hebie, etc.) must be individually checked for compatibility. In no case may the rotating hub shell or the splined carrier come into contact with the chain guard or drag along!
For special cases where an adjustment of the chainline is not possible (eg special chain case, chain in the rear running, collision with chain stay due to unusually narrow installation space) we offer the Splined Carrier S (Art.Nr. 8540S) for chainline 55mm. This is to be used exclusively for pinion 15Z-19 + 21Z and is not compatible with pinion 13Z + 14Z and not suitable for Gates pulleys.
Features
- All Rohloff sprockets are reversible and designed for a chainline of 55mm (position like large chainring on 3-speed Shimano cranks)
- Due to the extended number of teeth in the pinion, more chainring / sprocket combinations result
Material
- Stainless steel
Weight
- 38g
Scope of delivery
- 1 Rohloff Splined Carrier pinion adapter with circlip narrow
Recommendation
For everyday use, a gear ratio of factor approx. 2.5 - 2.8 has proven to be common. For off-road use of the SPEEDHUB in 29er/27.5" MTB or Fatbikes a very light mountain gear is desired -> which can be achieved with a smaller factor of up to 1.9.To exclude an overload of the gearbox, a minimum chain ratio (factor 1.9) must not be undercut for safety reasons. The smallest permissible chain ratios for solo riders up to max 100 kg are: 40/21, 36/19, 34/18, 32/17, 30/16, 28/15, 26/14 and 26/13 = factor ~ 1.9.
For tandem use or persons over 100 kg body weight, the following chainring/pinion tooth combinations (factor = 2.5) must not be undercut: 34/13, 35/14, 38/15, 40/16, 42/17, 45/18, 48/19, 52/21.
ATTENTION
For the combination of plug-in sprocket with chain tensioner, a long fixing bolt with washers must be used to adjust to chainline 58mm.
The use of a closed chain guard (Hebie, etc.) must be individually checked for compatibility. In no case may the rotating hub shell or the splined carrier come into contact with the chain guard or drag along!
For special cases where an adjustment of the chainline is not possible (eg special chain case, chain in the rear running, collision with chain stay due to unusually narrow installation space) we offer the Splined Carrier S (Art.Nr. 8540S) for chainline 55mm. This is to be used exclusively for pinion 15Z-19 + 21Z and is not compatible with pinion 13Z + 14Z and not suitable for Gates pulleys.
- Numer producenta: 8540S
- EAN: 4250307407422
Producent:
Rohloff AGMönchswiese 11
34233 Fuldatal
Deutschland
[email protected]
www.rohloff.de/de/
Oceny
Zaloguj się
Zaloguj się, aby dodać opinię! Nie weryfikujemy, czy oceniany produkt został zakupiony u nas.
Ostatnio oglądane