Scott Patron 900 Ultimate Carbon Black
Informacje dot. produktu "Patron 900 Ultimate Carbon Black"
Połączenie najlepszych cech wszystkich światów. Wszystko jest możliwe – dzięki modelowi Patron eRIDE 900 Ultimate. Z łatwością pokonaj każdy podjazd, a następnie pewnie zjedź w dół dzięki bezpiecznemu prowadzeniu. Zawieszenie FOX o skoku 150 mm z przodu i z tyłu radzi sobie z każdym terenem, a silnik Bosch Performance CX Gen. 5 z akumulatorem o pojemności 800 Wh zapewnia pełną moc w pakiecie zaprojektowanym z myślą o dominacji na singletrackach. Wykorzystaj tę moc i opanuj trasy dzięki hamulcom Shimano XT.
Cechy – Scott Patron 900 Ultimate
- Widelec amortyzowany FOX 36 Performance Air 150 mm oraz amortyzator FOX Nude 6T EVOL, 3 tryby pracy, blokada, skok 150 mm
- 12-rzędowa przerzutka SRAM X0 Eagle AXS
- 4-tłoczkowe hydrauliczne hamulce tarczowe Shimano z systemem Bosch ABS Pro z przodu
- Zestaw kół DT Swiss HXC 1501 z oponami Maxxis Forekaster 29x2,6"
- Wysokiej jakości sztyca, kierownica i siodełko Syncros Vario
- Silnik Bosch Performance Line CX Gen.5 z akumulatorem 800 Wh
- Mini pilot Bosch System Controller i wyświetlacz KIOX 300
Uwaga: w zestawie nie ma pedałów!
Technologie
Silnik i akumulator
Dla rowerzystów górskich, którzy chcą odkrywać nowe tereny i jeździć po bardziej zróżnicowanym terenie niż kiedykolwiek wcześniej, model Patron eRIDE oferuje najnowszą technologię silnika i akumulatora w pakiecie stworzonym z myślą o pokonywaniu singletracków. Dzięki najnowszemu napędowi Bosch Performance CX i akumulatorowi Powertube o pojemności 800 Wh rower Patron to Twoja przepustka do wolności w górach.
Opatentowana technologia zintegrowanego amortyzatora
Wspaniały dzień na szlakach zaczyna się od doskonałej konstrukcji zawieszenia, a zintegrowany skok amortyzatora o długości 150 mm w modelu Patron zapewnia płynną jazdę po każdym terenie. Dzięki zintegrowanemu amortyzatorowi udało nam się uzyskać pożądane właściwości tłumienia, a jednocześnie stworzyć miejsce na idealne rozmieszczenie elementów, takich jak silnik, akumulator i bidon. Jeździsz po bardzo zróżnicowanym terenie? Dzięki pilotowi TracLoc zamontowanemu na kierownicy możesz zmienić charakterystykę zawieszenia jednym naciśnięciem kciuka, dostosowując je do danej trasy.
Konstrukcja ramy
Linia Patron eRIDE obejmuje modele z włókna węglowego i aluminium, z których oba zostały starannie zaprojektowane w celu wykorzystania unikalnych właściwości poszczególnych materiałów. Model Patron eRIDE został poddany w fazie rozwoju szeregowi rygorystycznych testów i licznym iteracjom, dzięki czemu charakteryzuje się idealnym połączeniem sztywności, wytrzymałości i rozkładu masy, co zapewnia niezrównane wrażenia z jazdy – zwłaszcza w trudnych warunkach.
Akcesoria i kompatybilność
Dzięki dopracowanym w najdrobniejszych szczegółach elementom, takim jak zintegrowany błotnik i tylne światło LED, Patron eRIDE to rower, na który wystarczy wsiąść i ruszyć w drogę. Co więcej, rower Patron jest wstępnie okablowany i gotowy do podłączenia reflektora do głównego akumulatora. Dla modelu Patron eRIDE dostępna jest również gama akcesoriów marki Syncros, takich jak podpórka, bagażnik lub uchwyt do kamer sportowych.
Integracja przewodów
Fakt: rowery elektryczne wiążą się z obecnością kabli. Na szczęście w modelu Patron eRIDE wszystkie kable są starannie zintegrowane z ramą, co pozwala ukryć je przed wzrokiem, chronić przed czynnikami atmosferycznymi oraz zapewnić, że żadne niepotrzebne zagięcia nie wpłyną negatywnie na ich działanie.
- Numer producenta: 4256953020008
- Rok modelowy: 2026
Route du Crochet 11
1762 Givisiez
Switzerland
P.E.D. Zone C1 Rue du Kiell 60
6790 Aubange
Belgium
www.scott-sports.com/contact
Scott Patron 900 Ultimate Carbon Black
Połączenie najlepszych cech wszystkich światów. Wszystko jest możliwe – dzięki modelowi Patron eRIDE 900 Ultimate. Z łatwością pokonaj każdy podjazd, a następnie pewnie zjedź w dół dzięki bezpiecznemu prowadzeniu. Zawieszenie FOX o skoku 150 mm z przodu i z tyłu radzi sobie z każdym terenem, a silnik Bosch Performance CX Gen. 5 z akumulatorem o pojemności 800 Wh zapewnia pełną moc w pakiecie zaprojektowanym z myślą o dominacji na singletrackach. Wykorzystaj tę moc i opanuj trasy dzięki hamulcom Shimano XT.
Cechy – Scott Patron 900 Ultimate
- Widelec amortyzowany FOX 36 Performance Air 150 mm oraz amortyzator FOX Nude 6T EVOL, 3 tryby pracy, blokada, skok 150 mm
- 12-rzędowa przerzutka SRAM X0 Eagle AXS
- 4-tłoczkowe hydrauliczne hamulce tarczowe Shimano z systemem Bosch ABS Pro z przodu
- Zestaw kół DT Swiss HXC 1501 z oponami Maxxis Forekaster 29x2,6"
- Wysokiej jakości sztyca, kierownica i siodełko Syncros Vario
- Silnik Bosch Performance Line CX Gen.5 z akumulatorem 800 Wh
- Mini pilot Bosch System Controller i wyświetlacz KIOX 300
Uwaga: w zestawie nie ma pedałów!
Technologie
Silnik i akumulator
Dla rowerzystów górskich, którzy chcą odkrywać nowe tereny i jeździć po bardziej zróżnicowanym terenie niż kiedykolwiek wcześniej, model Patron eRIDE oferuje najnowszą technologię silnika i akumulatora w pakiecie stworzonym z myślą o pokonywaniu singletracków. Dzięki najnowszemu napędowi Bosch Performance CX i akumulatorowi Powertube o pojemności 800 Wh rower Patron to Twoja przepustka do wolności w górach.
Opatentowana technologia zintegrowanego amortyzatora
Wspaniały dzień na szlakach zaczyna się od doskonałej konstrukcji zawieszenia, a zintegrowany skok amortyzatora o długości 150 mm w modelu Patron zapewnia płynną jazdę po każdym terenie. Dzięki zintegrowanemu amortyzatorowi udało nam się uzyskać pożądane właściwości tłumienia, a jednocześnie stworzyć miejsce na idealne rozmieszczenie elementów, takich jak silnik, akumulator i bidon. Jeździsz po bardzo zróżnicowanym terenie? Dzięki pilotowi TracLoc zamontowanemu na kierownicy możesz zmienić charakterystykę zawieszenia jednym naciśnięciem kciuka, dostosowując je do danej trasy.
Konstrukcja ramy
Linia Patron eRIDE obejmuje modele z włókna węglowego i aluminium, z których oba zostały starannie zaprojektowane w celu wykorzystania unikalnych właściwości poszczególnych materiałów. Model Patron eRIDE został poddany w fazie rozwoju szeregowi rygorystycznych testów i licznym iteracjom, dzięki czemu charakteryzuje się idealnym połączeniem sztywności, wytrzymałości i rozkładu masy, co zapewnia niezrównane wrażenia z jazdy – zwłaszcza w trudnych warunkach.
Akcesoria i kompatybilność
Dzięki dopracowanym w najdrobniejszych szczegółach elementom, takim jak zintegrowany błotnik i tylne światło LED, Patron eRIDE to rower, na który wystarczy wsiąść i ruszyć w drogę. Co więcej, rower Patron jest wstępnie okablowany i gotowy do podłączenia reflektora do głównego akumulatora. Dla modelu Patron eRIDE dostępna jest również gama akcesoriów marki Syncros, takich jak podpórka, bagażnik lub uchwyt do kamer sportowych.
Integracja przewodów
Fakt: rowery elektryczne wiążą się z obecnością kabli. Na szczęście w modelu Patron eRIDE wszystkie kable są starannie zintegrowane z ramą, co pozwala ukryć je przed wzrokiem, chronić przed czynnikami atmosferycznymi oraz zapewnić, że żadne niepotrzebne zagięcia nie wpłyną negatywnie na ich działanie.
- Numer producenta: 4256953020008
- Rok modelowy: 2026
Route du Crochet 11
1762 Givisiez
Switzerland
P.E.D. Zone C1 Rue du Kiell 60
6790 Aubange
Belgium
www.scott-sports.com/contact
Wyposażenie
| Akumulator: | Bosch Powertube 800Wh |
|---|---|
| Hamulce: | Shimano XT BR-M8220 4 Piston, Bosch ABS Pro |
| Inne szczegóły: | Suspension & Dropper Remote, SCOTT TracLoc 2 Technology 3 modes |
| Kaseta: | SRAM GX Eagle XS 1275 Transmission 10-52T |
| Kierownica: | Syncros Hixon iC Carbon, Size S & M 15mm rise, Size L & XL 25mm rise, back sweep 8°, 780mm |
| Kolor: | carbon black |
| Maksymalna dopuszczalna masa całkowita: | 130 kg (masa ciała + rower + sprzęt) |
| Manetki: | SRAM AXS Rocker Pod Controller |
| Materiał ramy: | Carbon Main Frame/ Alloy Rear Triangle |
| Obejmy kierownicy: | Syncros Performance XC lock-on grips |
| Opona przednia: | Maxxis Forekaster 29x2.6" 120TPI Foldable Bead EXO / TR Tubeless ready 3C Maxx Terra |
| Opona tylna: | Maxxis Forekaster 29x2.6" 120TPI Foldable Bead EXO / TR Tubeless ready 3C Maxx Terra |
| Pedały: | nie wchodzi w skład zestawu |
| Podróże: | 150mm/ 150mm |
| Podświetlenie: | Syncros integrated rear fender light |
| Przerzutka tylna: | SRAM X0 Eagle AXS Transmission 12 Speed, Wireless Electronic Shifting System |
| Przewodnik po łańcuchach: | e*thirteen / e*spec Slider |
| Prędkości: | 1 × 12 |
|---|---|
| Rama: | Carbon Main Frame, Alloy SST-CST, Integrated Suspension Technology, Virtual 4 Link kinematic, Adjustable head angle, Syncros Cable Integration System, UDH Interface, 12x148mm with 55mm Chainline, Bosch PowerMore Ready |
| Rozmiar koła: | 27.5"x2.4 |
| Silnik: | Bosch Performance Line CX (BDU384Y) 25kmh |
| Siodło: | Syncros Tofino-E 1.5 Regular, Titanium rails |
| Sztyca: | Syncros Duncan Dropper Post 1.5S / Travel Adjust / 31.6mm / S 140mm / M 180mm / L 180mm / XL 210mm |
| Tarcze hamulcowe: | Shimano SM-RT66 Front 220mm, Rear 203mm |
| Tylny amortyzator: | FOX NUDE 6T Factory EVOL Trunnion, SCOTT custom w. travel, geo adj., 3 modes: Lockout-Traction Control-Descend, Low Speed Adj., Custom large Air volume, Reb. Adj., Bearing Hardware, Travel 150-100-Lockout, T185X55mm |
| Waga: | ab 23,7 kg |
| Widelec: | FOX 36 Factory Air, eMTB+, Grip X2, HSC - LSC - HSR - LSR adjustable, QR Axle 15x110mm, 44mm offset, tapered steerer, 150mm travel |
| Zestaw korbowy: | SRAM X0 Eagle, Alloy |
| Zestaw kół: | DT Swiss HXC1501, Hybrid, Carbon rims |
| Zestaw słuchawkowy: | Syncros - Acros Angle adjust & Cable Routing HS System, Stainless / +-0.6° head angle adjustment, ZS56/28.6 – ZS56/40 MTB |
| Ładowarka: | 4A charger |
| Łańcuch: | KMC X9 |
| Światło przednie: | Front Light Cable pre-installed |
| Display: | Bosch System Controler, Mini Remote & Kiox 300 |
What components does the smart system from Bosch consist of?
Bosch Drive Unit Performance Line CX Motor Generation 5

The Performance Line CX Gen.5 (BDU384Y) motor takes riding dynamics and agility to a new level. It is powerful, light and quiet. Ten years of experience and countless trail rides around the world have gone into its further development. The Performance Line CX motor combines power, dynamics, efficiency and reach. 85-600-340: 85Nm max. torque, 600W max. motor power, 340% max. support factor. These values represent the ideal balance between performance and riding pleasure in relation to wear and tear and range.
Powerful uphill
The maximum torque of 85 Nm has a noticeable effect on your riding performance when eMountain biking. The powerful motor enables powerful acceleration after tight bends and obstacles at a low cadence and simplifies hill starts. For fast sprints, the motor also supports you at high cadences.
Intuitive handling
One mode for more focus: The eMTB mode, specially designed for sporty use, gives you optimum control and intuitive handling, as you don't have to switch between the different riding modes as often. With this clever eMTB mode function, technical passages can be ridden with confidence and obstacles such as roots and thick branches can be easily overcome with targeted pedal pressure using the Extended Boost. The Performance Line CX drive unit ensures even more riding fun and a flow experience that sets new standards.
Maximum agility
The multi-sensor concept enables controlled and agile riding even on technically demanding trails, combined with the innovative Bosch motor control, it stands for maximum dynamics and sensitivity.
Sporty and economical
Sporty riding on a trekking bike or eMTB: With the Tour+ riding mode of the Bosch Performance Line CX, the focus is always on riding enjoyment. It eliminates the need to switch between support modes so that you can concentrate fully on eBiking. With Tour+ mode, you pedal harder on flat stretches than in Tour mode and are more sporty on the road - the riding mode therefore saves power and extends your radius - for even more riding fun! Trail or asphalt - Tour+ mode always suits you. Because it constantly adapts to you. Sensors on the motor measure important riding data more than 1,000 times per second, from which the Tour+ mode derives the optimum support for you. It regulates the additional power so sensitively that you not only get a natural riding experience, but also a greater range with greater power input.
Individual riding experience
The available riding modes can be individually set in the eBike Flow app so that the eBike's riding characteristics match your own riding style or the route you have chosen. The level of assistance, dynamics, maximum speed and maximum torque of the drive can thus be flexibly adjusted to your personal needs and requirements. Intensive training or an extended eBike tour - the riding modes always offer you the right support and enable even more riding enjoyment.
The Performance Line CX responds to your input more sensitively than ever before
Bosch has reinterpreted and improved the signals from the sensors. Inertial sensors (IMU), cadence sensor, torque sensor. The new motor does exactly what you want - sensitive, controlled and direct. That's a natural riding experience
eMTB mode and Extended Boost
You don't need any other riding mode to get into the uphill flow. Because that's what Bosch has developed it for. The eMTB mode reacts progressively to you and recognizes in a flash how much power you want based on your pedal pressure - dynamically, with maximum traction and always in control. With the integrated Extended Boost, all it takes is a targeted kick on the pedal and the Drive Unit pushes you effortlessly over steps and stones.
Push assist and hill start assist
Get to your destination: Helpful functions take the weight off your eMTB when you need to stop in tricky sections. With the push assist, you can easily push your eMTB, while the Drive Unit automatically adjusts the pushing speed to the incline and surface. In addition, the hill start assist enables a controlled and high-traction start, even on steep terrain. Hill Hold is active in both cases: your eMTB stays in place and does not roll back unexpectedly.
Compatible with Bosch eBike ABS Pro
Triumph over the trail: Bosch has developed the eBike Pro for outstanding performance. ABS Pro is ideal for professional eBikers: designed for fast, sporty downhill riding and braking. You can make full use of your braking skills and still feel how the system increases performance.
Compatible with eShift from TRP
Thanks to the electric shifting solution, you can ride to the trail with maximum relaxation and maximum performance on the trail. You can decide whether eShift with TRP should shift automatically for you or whether you want to change gear yourself on varied terrain with fast maneuvers - simply at the touch of a button. With eShift, gear changes are efficient and precise.
Optional PowerMore 250 range extender
Extend the range and enjoy even longer trail fun with the water bottle-sized energy reserve. Compact and 1.5 kilograms in weight, the range extender can be easily attached to the water bottle holder. It can be combined with all batteries in the smart system. Please find out in advance whether you can use the range extender for your eBike.
Individual riding modes
A natural riding experience is individual - with the eBike Flow app, you can create a riding mode to suit your needs. Your trail, your riding experience, your mode: With the help of four parameters, you can easily adapt the riding modes to your needs using the slider in the eBike Flow app. Support, dynamics, maximum torque and maximum speed - you decide what you need.
Powder-coated. Robust right up to the tips
- The housing is made of magnesium - robust, corrosion-resistant and hard
- The sealing concept prevents splash water from penetrating
- The sound of the trail - nothing else: Bosch has been able to reduce the noise generated by the gearbox. The new motor is quiet. It creates a balance between power delivery and noise development
- Power. Distributed over 2.8 kilograms. The Performance Line CX is around 100 grams lighter than the previous version
Bosch eBike Flow app

Extend the eBike
Use the eBike Flow app to download new functions and updates for components such as the battery or motor and send them to your eBike via Bluetooth. This keeps it up to date and gives you more options.
Record activities
Record your tour and fitness data as soon as you set off. For iPhone users, Activity Tracking also synchronizes all data automatically with Apple Health if desired. If you take a break, the recording stops automatically.
Individualize riding modes
Customize the riding mode exactly to your needs: You can fine-tune the Eco, Tour, Sport and Turbo riding modes so that they offer you more support or consume less power.
Keep an eye on everything
Get a quick overview of everything important on the home screen. Whether battery status, remaining range, distance already ridden or next service appointment - the home screen shows you everything you need to know with continuously updated eBike data.
Bosch Kiox 300 display

Features that are fun
The robust display is an intelligent companion for sporty tours to determine fitness data and optimize your training. Kiox 300 always stays up to date thanks to regular over-the-air updates and will continue to ensure optimum flow in the future with growing offers and new functions via the eBike Flow app.
Easy to read, stylish design
Small but powerful. Kiox 300 not only impresses with its compact size, but also with a color display that is easy to read day and night. Operation via the LED remote is simple and is visually supported by animations and images. The handy display underlines the clean eBike look and is protected against splash water and dust.
Helpful support
No more tedious pushing. You can activate the new Walk Assist via the LED remote, providing helpful support on mountainous climbs. Kiox 300 offers clear, visual instructions and makes intuitive operation easier for you. The display also supports you before or during your ride by clearly showing you the remaining range for all riding modes. This allows you to better assess which riding mode is easiest for you to reach your destination - for optimal tour planning.
Positioning as desired
The display holder allows the display to be individually positioned on the handlebars and is adapted to your personal needs. The tilt angle of the display can also be individually adjusted - for optimum readability during the tour.
Bosch System Controller and Mini Remote
![]() | Simple operation Concentrate fully on the traffic in the city or on your trail ride. |
![]() | Robust and functional companion The System Controller is perfect for modern eUrban bikes or sporty eMTBs. |
![]() | Continuous extensions Connect your smartphone to the System Controller and benefit from new functions via the eBike Flow app. |
![]() | Minimalist look System Controller and Mini Remote stand for an unadulterated and clean eBike look. |
Bosch System Controller

Minimalist, robust control unit
The System Controller is the control unit for eBikes with the smart system, reduced to the essentials. The deliberately limited number of functions and information facilitates a quick overview and is not distracting while riding. The System Controller is seamlessly integrated into the top tube - this means that the already robust companion is additionally protected, is barely noticeable and is perfect for sporty tours and design-oriented eBike fans.
LED display
LEDs indicate the riding mode and battery charge level in 10% increments using different colors.
Connected in a smart system
The system controller makes your eBike smart and is the interface for software updates.
Built into the top tube
The System Controller is barely noticeable, is made of robust material and is therefore protected from knocks and scratches.
Two buttons
You can control the most important functions of your eBike with just two buttons: Switch your eBike on or off and change the riding mode.
Hardware facts
- Indication of the current charge status of the eBike using the five charge status LEDs
- Indication of the assistance level by the color display of the riding mode LED: red, purple, blue, green
- Expandable with Mini Remote for additional functions and more convenient operation
- Modular use: The System Controller can be used in conjunction with the Mini Remote to control the eBike Flow app and the Bosch display while riding
- Use of the pushing aid via the Mini Remote and display of the status by rolling illumination of the charging status LEDs on the System Controller (white = pushing aid ready; ice blue = pushing aid active)
- Switching the light on/off
- Ambient light sensor automatically adjusts the brightness of the LEDs
- Two-component design: combination of soft-touch surface and hard material for optimum ergonomics and robustness
- Replaceable and long-lasting battery lasts up to approx. 7 years
- Display of the ABS function via ABS LED (only for eBikes with Bosch eBike ABS)
- Diagnostic interface (type: USB-C) for diagnosing the eBike system or for charging the integrated battery of the system controller
- System plug for connecting the eBike system
- IP54 protected against dust and splash water
- Temperature range: -5 °C to +40 °C (operation) and +10 °C to +40 °C (storage)
- Only available for eBikes with the smart system
Bosch Mini Remote

As an additional operating unit, the Mini Remote supplements the System Controller, extends the range of functions and enables safe operation. It is connected to the System Controller via Bluetooth and can be flexibly mounted on the handlebars. The buttons near the thumb keep your hands on the handlebars at all times. More buttons offer more functions: With the Mini Remote, you get practical features such as smart push assistance and you can switch your eBike light on or off.
Quick to retrofit
The Mini Remote can be retrofitted quickly and is connected to the System Controller via Bluetooth.
Three buttons, more functions
The buttons on the Mini Remote are assigned twice: for the riding mode, the light function and the smart pushing aid as well as for controlling a display.
Full flexibility
The Mini Remote works with or without a display. Operate the Ride Screen of the eBike Flow app or your display screens.
Intuitive operation
Short distances for the thumb and non-slip soft-touch surface: The buttons are provided with icons and can be used intuitively.
Hardware facts
- Optional addition to the system controller for additional functions and convenient operation on the handlebars
- Control of the ride screen or navigation screen in the eBike Flow app (smartphone) or the Bosch display
- Smart pushing aid and innovative rollback protection (provides support on steep, unrideable inclines and can prevent the eBike from rolling backwards)
- Switch light on/off
- Optimum ergonomics of the buttons thanks to flat design
- Wireless mounting on the handlebars
- Soft-touch surface for particularly good grip
- LED indicates low battery of the Mini Remote, pairing activity or missing connection to the system
- The battery life (button cell CR1620) can last up to approx. 2 years and can be easily replaced by removing it from the handlebars and inserting it into the rubber insert
- IP54 protected against dust and splash water
- Temperature range: -5 °C to +40 °C (operation) and +10 °C to +40 °C (storage)
- Only available for eBikes with the smart system
- Bluetooth connectivity (Bluetooth 5.0 Low Energy)
Bosch PowerTube 600 / 800

Maximum range
With the PowerTube 600 / 800, long distances and many meters of altitude are easy to master.
Stylish eBike design
Like all Bosch PowerTubes, the PowerTube 600 / 800 is perfectly integrated into the frame. An attractive eBike design and high capacity - a combination without compromise. A new, lighter housing has been used for the battery. Provided the eBike manufacturer has prepared the eBike for this, it can be easily replaced - for more or less range.
Reliable energy supplier
High safety standards. Enormous mileage, long service life, reliable handling - the lithium-ion battery is equipped with a battery management system that protects the battery cells from overload.
User-friendly handling
The PowerTube 600 / 800 is characterized by particularly easy handling. The battery is always securely anchored in the frame on all tours, removal is via an intuitive, lockable mechanism and offers you user-friendly operation.
Comparison table
| PowerTube | 600 | 800 |
|---|---|---|
| System | The smart system | The smart system |
| Mounting type | In the frame | In the frame: Horizontal / Vertical |
| Voltage | 36 V | 36 V |
| Battery capacity | 16.7 Ah | 22.2 Ah |
| Energy content | approx. 600 Wh | approx. 800 Wh |
| Weight, Frame battery / Rack battery | approx. 3.0 kg | approx. 3.9 kg |
| Size, horizontal / vertical | 424 x 71 x 67 mm | 424 x 77 x 71 mm / 430 x 71 x 77 mm |
| Compatible with DualBattery of the smart system | yes | yes |
| 4A Charger | 50 % charge: approx. 2.0 hours 100 % charge: approx. 5.3 hours | 50 % charge: approx. 2.6 hours 100 % charge: approx. 6.9 hours |
| 2A Charger | 50 % charge: approx. 4.2 hours 100 % charge: approx. 9.1 hours | 50 % charge: approx. 5.7 hours 100 % charge: approx. 12.4 hours |
Geometria
Zaloguj się, aby dodać opinię! Nie weryfikujemy, czy oceniany produkt został zakupiony u nas.
Ostatnio oglądane



