Przejdź do głównej zawartości Przejdź do wyszukiwania Przejdź do głównej nawigacji
Pomiń galerię produktów

UVP* 12,99 € 8,99 €

Średnia ocena 4.75 z 5 gwiazdek

5,99 €

Średnia ocena 5 z 5 gwiazdek

UVP* 7,95 € 4,99 €

Średnia ocena 5 z 5 gwiazdek

UVP* 14,95 € 9,99 €

Średnia ocena 4.17 z 5 gwiazdek

UVP* 7,99 € 6,99 €

Średnia ocena 5 z 5 gwiazdek

UVP* 24,99 € 17,99 €

Średnia ocena 4.88 z 5 gwiazdek

UVP* 16,95 € 11,99 €

Średnia ocena 4.83 z 5 gwiazdek

UVP* 14,00 € Od 8,99 €

UVP* 9,95 € 5,99 €

Średnia ocena 4.5 z 5 gwiazdek

UVP* 24,99 € 22,99 €

UVP* 29,99 € 25,99 €
UVP* 37,99 €

26,99 €

zawiera 19% VAT

plus koszty wysyłki

Liczba
  • Na stanie, Czas dostawy 1-3 Dni
Numer produktu: 20103481

Informacje dot. produktu "EVO Zip Tie - Błotnik przedni"

The Mudhugger EVO Zip-Tie was developed for the latest Fox 36/38 and RockShox ZEB forks to prevent the fork crown from hitting the mudguard when fully compressed. It is attached either with the supplied cable ties or the separately available Velcro fasteners.

The Mudhugger EVO Zip-Tie was introduced in 2021 and developed with the help of riders from the DH World Cup and EWS. It was designed based on the current FOX 36/38 and RockShox ZEB models to address the problem of collision between the mudguard and fork crown at full compression that many other mudguards have. It is also stiffer and offers more tire clearance than the original design. It is stable enough for DH use at the highest level. The length is optimized so that the mudguard is only as long as necessary to ensure the best protection, a slightly indicated spoiler improves splash protection. The rear length is 330 mm, the front 185 mm.

The Mudhugger Zip-Tie is compatible with most suspension forks, but in some cases requires minor modifications. For example, to mount the EVO on a Manitou Mezza or similar models with reverse arch (rear bridge), four small holes must be drilled to allow attachment to the bridge. Please refer to the compatibility chart and contact us if in doubt if the fork you are looking for is not yet listed.

Although fastening with cable ties is ideal for permanent mounting, it is also possible to mount the mudguard using an optional Velcro fitting kit so that it can be easily removed and refitted. This also saves a little plastic waste.


Product features - Mudhugger EVO Zip Tie

  • Compatibility: suspension forks with Boost standard
  • Wheel size: 26" / 27.5" / 29"
  • Mounting: Cable tie
  • Position: Suspension fork
  • Length: 515mm total - rear extension 330mm, front extension 185mm

Material

  • Recycled plastic

Color

  • black color

Weight

  • 120g

Scope of delivery

  • 1 x Mudhugger EVO Zip Tie - mudguard with cable ties
  • 4 x cable ties

The all new Mudhugger EVO - CRASHES, SLIPS AND SPILLS

  • Numer producenta: MHEVOZIPTIE
  • EAN: 0604565490148
  • UPC: 604565490148




Mudhugger EVO Zip Tie - Błotnik przedni

The Mudhugger EVO Zip-Tie was developed for the latest Fox 36/38 and RockShox ZEB forks to prevent the fork crown from hitting the mudguard when fully compressed. It is attached either with the supplied cable ties or the separately available Velcro fasteners.

The Mudhugger EVO Zip-Tie was introduced in 2021 and developed with the help of riders from the DH World Cup and EWS. It was designed based on the current FOX 36/38 and RockShox ZEB models to address the problem of collision between the mudguard and fork crown at full compression that many other mudguards have. It is also stiffer and offers more tire clearance than the original design. It is stable enough for DH use at the highest level. The length is optimized so that the mudguard is only as long as necessary to ensure the best protection, a slightly indicated spoiler improves splash protection. The rear length is 330 mm, the front 185 mm.

The Mudhugger Zip-Tie is compatible with most suspension forks, but in some cases requires minor modifications. For example, to mount the EVO on a Manitou Mezza or similar models with reverse arch (rear bridge), four small holes must be drilled to allow attachment to the bridge. Please refer to the compatibility chart and contact us if in doubt if the fork you are looking for is not yet listed.

Although fastening with cable ties is ideal for permanent mounting, it is also possible to mount the mudguard using an optional Velcro fitting kit so that it can be easily removed and refitted. This also saves a little plastic waste.


Product features - Mudhugger EVO Zip Tie

  • Compatibility: suspension forks with Boost standard
  • Wheel size: 26" / 27.5" / 29"
  • Mounting: Cable tie
  • Position: Suspension fork
  • Length: 515mm total - rear extension 330mm, front extension 185mm

Material

  • Recycled plastic

Color

  • black color

Weight

  • 120g

Scope of delivery

  • 1 x Mudhugger EVO Zip Tie - mudguard with cable ties
  • 4 x cable ties

The all new Mudhugger EVO - CRASHES, SLIPS AND SPILLS

  • Numer producenta: MHEVOZIPTIE
  • EAN: 0604565490148
  • UPC: 604565490148




Oceny

Średnia ocena 4 z 5 gwiazdek

(4)

(1)

(2)

(1)

(0)

(0)


Dimitris ..

Średnia ocena 5 z 5 gwiazdek

Excellent and silent mud guard.

Tjeerd J.

Średnia ocena 4 z 5 gwiazdek

Sieht super aus, passt aber nicht richtig mit SID 35 Gabel und 2.4 Reifen.

Axel K.

Średnia ocena 4 z 5 gwiazdek

Passt gut an meine FOx 36. Mit ca. 2 cm mehr Auszug nach hinten wäre der Schutz noch besser.

Rüdiger M.

Średnia ocena 3 z 5 gwiazdek

An eine Fox 32 passt das Teil nicht wirklich. Kann man zwar irgendwie ranfriemeln, sitzt aber sehr eng über dem Reifen.

neleCustomerReviews.detail.showAllReviewsButton.text neleCustomerReviews.detail.showLessReviewsButton.text

Zaloguj się, aby dodać opinię! Nie weryfikujemy, czy oceniany produkt został zakupiony u nas.

Ostatnio oglądane