L'articolo è stato aggiunto con successo.
67 Altri articoli in questa categoriaMostra più articoli in questa categoria

Rohloff Splined Carrier Adapter with Snap Ring Circlip small

Rohloff-Splined-1.jpg
Rohloff-Splined-2.jpg
   
Questo articolo non è attualmente disponibile!
Vorrei essere informato non appena l'articolo sarà di nuovo disponibile.
  • nessuna disponibilita 
RRP* 27,90 € € 23,95
risparmiato 14 %

inclusa 19% IVA, più 3,99 € di spese di spedizione

Richiesta del miglior prezzo

Se trovi un articolo ad un prezzo inferiore con un altro rivenditore commerciale su Internet, lo riceverai da noi allo stesso prezzo, purché siano soddisfatte le condizioni elencate nel link.

Per maggiori informazioni sulla garanzia del miglior prezzo, consulta qui:
Bike-Dike-Discount Miglior Prezzo Garantito

La richiesta del miglior prezzo verra  elaborata solo dopo l'invio dell'ordine.
La concessione del miglior prezzo è non cumulabile con altre promozioni (es. "articoli gratuiti) di Bike-Discount.

Prezzo del concorrente:

I costi di spedizione sostenuti dal concorrente e il vostro messaggio a noi:


20043523
Splined Carrier Adapter with Snap Ring Circlip small
It is possible to retrofit the new splines sprocket system to every Rohloff SPEEDHUB 500/14 transmission. One must simply remove the old, worn sprocket using a chainwhip and our special sprocket remover tool.

Features

  • All Rohloff Splined Sprockets are reversible and constructed to offer a 3mm wider chainline (than the original threaded sprockets) (position of largest sprocket on modern triple cranksets)
  • The belt-line with Carrier of a Carbon Drive transmission remains 55mm (+/-1mm) as before
  • The extended range of sprocket sizes now available, offers a greater choice of primary transmission ratios and thus gear-inches

Material

  • Stainless steel

Weight

  • 38g

Scope of delivery

  • 1 Rohloff Splined Carrier Adapter with Snap Ring Circlip small

Recommendation

Experience shows that regular commuter/leisure cyclists will be best suited using a transmission factor of 2.5 -2.8 Offroad cyclists using 29er/650B/Fatbikes tend to opt for a lighter gear ratio. Solo cyclists weighing less than 100kg may do so. This lighter ratio must not fall below 1.9 however!

The higher the chainring/sprocket ratio, the lower the input torque to the gear-unit. It is imperative therefore that the chainring/sprocket factor does not drop below 1.9 (e.g. 34/17=2.0). The smallest permissible sprocket ratios for a rider weighing less than 100kg are: 40:21, 36:19, 34:18, 32:17, 30:16, 28:15, 26:14 und 26:13 = Factor ~ 1,9.

These are the equivalent to a 22:40 combination on a conventional drivetrain. There is no limit whatsoever for higher ratios which means that you can mount bigger chainrings than shown on the table for extreme downhill racing.

If the SPEEDHUB is mounted on a tandem bicycle or if the rider weighs over 100kg, a chainring/sprocket factor of 2.5 (e.g. 42/17=2.5) must be upheld. This equates to sprocket ratios of: 34:13, 35:14, 38:15, 40:16, 42:17, 45:18, 48:19, 52:21.

ATTENTION
Chain-cases such as Hebie must be checked individually for compatibility. The chain-case must run collision free without touching either hub shell nor the splined carrier!
8540S
4250307407422
Splined Carrier Adapter with Snap Ring Circlip small
It is possible to retrofit the new splines sprocket system to every Rohloff SPEEDHUB 500/14 transmission. One must simply remove the old, worn sprocket using a chainwhip and our special sprocket remover tool.

Features

  • All Rohloff Splined Sprockets are reversible and constructed to offer a 3mm wider chainline (than the original threaded sprockets) (position of largest sprocket on modern triple cranksets)
  • The belt-line with Carrier of a Carbon Drive transmission remains 55mm (+/-1mm) as before
  • The extended range of sprocket sizes now available, offers a greater choice of primary transmission ratios and thus gear-inches

Material

  • Stainless steel

Weight

  • 38g

Scope of delivery

  • 1 Rohloff Splined Carrier Adapter with Snap Ring Circlip small

Recommendation

Experience shows that regular commuter/leisure cyclists will be best suited using a transmission factor of 2.5 -2.8 Offroad cyclists using 29er/650B/Fatbikes tend to opt for a lighter gear ratio. Solo cyclists weighing less than 100kg may do so. This lighter ratio must not fall below 1.9 however!

The higher the chainring/sprocket ratio, the lower the input torque to the gear-unit. It is imperative therefore that the chainring/sprocket factor does not drop below 1.9 (e.g. 34/17=2.0). The smallest permissible sprocket ratios for a rider weighing less than 100kg are: 40:21, 36:19, 34:18, 32:17, 30:16, 28:15, 26:14 und 26:13 = Factor ~ 1,9.

These are the equivalent to a 22:40 combination on a conventional drivetrain. There is no limit whatsoever for higher ratios which means that you can mount bigger chainrings than shown on the table for extreme downhill racing.

If the SPEEDHUB is mounted on a tandem bicycle or if the rider weighs over 100kg, a chainring/sprocket factor of 2.5 (e.g. 42/17=2.5) must be upheld. This equates to sprocket ratios of: 34:13, 35:14, 38:15, 40:16, 42:17, 45:18, 48:19, 52:21.

ATTENTION
Chain-cases such as Hebie must be checked individually for compatibility. The chain-case must run collision free without touching either hub shell nor the splined carrier!
8540S
4250307407422
Valutazioni
    5 Stelle _ (0)
    4 Stelle _ (0)
    3 Stelle _ (0)
    2 Stelle _ (0)
    1 Stelle _ (0)
Per inviare una valutazione, effettuare il login
Ultimi visti