Thanks to Hi-EPS, a perfect fit and inmold construction, the HAGA perfectly protects in the event of a collision. An integral rear light is positioned so that it is clearly visible even from the side. Due to this positioning, the bearer is seen earlier by other road users.
The proven ALPINA fit ensures that the bike helmet fits perfectly, does not slip and nothing tweaks. The dynamically designed helmet bar not only creates a light and modern urban look, but also ensures that the head is optimally ventilated. This ensures a cool head, safe road traffic decisions and maximum comfort.
Features - Haga Helmet
- Ceramic Shell
- Ergomatic
- HI-EPS
- Inmold
- Y-Clip
- Airflow Vents
- Fly Net
- Shield Protect
- Certification: EN 1078
Technologies
CERAMIC SHELL
That's the name for the outer shell of all ALPINA helmets featuring INMOLD manufacturing technology. This thin and light-weight material is extremely break- and scratch-resistant, UV-stable and antistatic.
ERGOMATIC
Tried and tested countless times, this is the buckle used in all Alpina cycle helmets. It features a red push button and multi-step automatic adjustment. It can be used one-handed, so for example you can loosen the strap when riding uphill and tighten it again for the descent, and it will not open in the event of a crash.
HI-EPS
The inner shell of all INMOLD helmets is made of HI-EPS (High Expanded Polystyrene). It consists of a multitude of microscopic air pockets that absorb the forces occurring in an impact. In addition, HI-EPS absorbs neither water nor sweat.
INMOLD
Inmold helmets are produced by foaming the inner shell underneath the outer shell under high pressure and heat. Thanks to the complete bonding between the upper and lower shells INMOLD helmets are extremely sturdy and very light. In addition, they offer clearly more safety than spot-bonded helmets.
Y-CLIP
A helmet can only provide proper protection if it stays securely in place in the event of an impact. The fastening that joins the two straps under the ear is critical to this. Alpina‘s Y-Clip system guarantees a perfect fit down to the last millimetre, all in a matter of seconds.
AIR FLOW VENTING
ALPINA developers invest a lot of time and energy in continually improving the ventilation of our bike helmets. By using a wind tunnel tested configuration of the vents our engineers achieve a “Venturi” effect inside the helmet. It cools the head, reduces perspiration and increases performance.
FLY NET
For protection against insect bites, the front holes of some models are lined with a net.
SHIELD PROTECT
The detachable shield protects against dirt splash as well as direct sunlight.
4003692295194
Thanks to Hi-EPS, a perfect fit and inmold construction, the HAGA perfectly protects in the event of a collision. An integral rear light is positioned so that it is clearly visible even from the side. Due to this positioning, the bearer is seen earlier by other road users.
The proven ALPINA fit ensures that the bike helmet fits perfectly, does not slip and nothing tweaks. The dynamically designed helmet bar not only creates a light and modern urban look, but also ensures that the head is optimally ventilated. This ensures a cool head, safe road traffic decisions and maximum comfort.
Features - Haga Helmet
- Ceramic Shell
- Ergomatic
- HI-EPS
- Inmold
- Y-Clip
- Airflow Vents
- Fly Net
- Shield Protect
- Certification: EN 1078
Technologies
CERAMIC SHELL
That's the name for the outer shell of all ALPINA helmets featuring INMOLD manufacturing technology. This thin and light-weight material is extremely break- and scratch-resistant, UV-stable and antistatic.
ERGOMATIC
Tried and tested countless times, this is the buckle used in all Alpina cycle helmets. It features a red push button and multi-step automatic adjustment. It can be used one-handed, so for example you can loosen the strap when riding uphill and tighten it again for the descent, and it will not open in the event of a crash.
HI-EPS
The inner shell of all INMOLD helmets is made of HI-EPS (High Expanded Polystyrene). It consists of a multitude of microscopic air pockets that absorb the forces occurring in an impact. In addition, HI-EPS absorbs neither water nor sweat.
INMOLD
Inmold helmets are produced by foaming the inner shell underneath the outer shell under high pressure and heat. Thanks to the complete bonding between the upper and lower shells INMOLD helmets are extremely sturdy and very light. In addition, they offer clearly more safety than spot-bonded helmets.
Y-CLIP
A helmet can only provide proper protection if it stays securely in place in the event of an impact. The fastening that joins the two straps under the ear is critical to this. Alpina‘s Y-Clip system guarantees a perfect fit down to the last millimetre, all in a matter of seconds.
AIR FLOW VENTING
ALPINA developers invest a lot of time and energy in continually improving the ventilation of our bike helmets. By using a wind tunnel tested configuration of the vents our engineers achieve a “Venturi” effect inside the helmet. It cools the head, reduces perspiration and increases performance.
FLY NET
For protection against insect bites, the front holes of some models are lined with a net.
SHIELD PROTECT
The detachable shield protects against dirt splash as well as direct sunlight.
4003692295194
Configuration
Fabricant: | Alpina |
Homme/femme/unisexe: | Unisex |
Application: | Trekking |
Couleur: | darksilver matt |