Relief and comfort in one: the SQlab saddle 60X Infinergy Ergowave active 2.1
This material is very robust and brings comfort to a completely new level, especially in off-road conditions, due to its quicker recovery. The cover is not pulled over the entire surface of the saddle as in classic saddles. There are only "tapes" on the important places. These are automatically attached to the Infinergy ® foam without any glue.
The ergonomic saddle shape provides the right relief and comfort: The wave-shaped elevation of the ERGOWAVE®, which extends from the rear to the front, offers a perfect form-fit shape for most sit bones. This significantly reduces the pressure in the perineal area or female pubic arch.
Also the flat, slightly curved saddle nose, which is lower in level, ensures less pressure on the sensitive areas for both men and women. For even better pressure relief, especially on longer climbs in the terrain, the saddle nose has been designed wide, with a flat and as large a contact surface as possible.
Thanks to the SQlab active saddle technology, the saddle follows the pedalling movement, comfort is increased, the intervertebral discs are mobilized and the pressure on the seat bones is minimized. A prerequisite for maximum performance is the perfect fit for the athlete and therefore the saddle is available in four different sizes.
Features - SQlab 6OX Infinergy ERGOWAVE® active 2.1
- Unisex - With the SQlab step saddle concept and the SQlab saddle width system, different saddles for men and women are no longer necessary
- Ergowave® - The new shape of the SQlab saddle with ergonomic sitting area for racing on the road and mountain bike. Created from the collaboration between Science & Research – Medicine – Technology & Cycling
- SQlab saddle width system - SQlab saddles are available in 5 different saddle widths. The correct saddle width is determined by the SQlab sit bone measurements
- SQlab active-technology - The active-saddle construction allows movement of the pelvis in the horizontal plane, which increases comfort and relieves the spinal discs. The active-saddles are equipped with two to four active-sticks
- SQlab MaxContact® - Saddle nose maximizes the area of contact and thus reduces pressure
- Water Resistant - Water resistant cover material
- E-bike ready
Product features
- Use: Gravity & E-Performance
- Length: 280 mm
- Hardness in SQ-shore: 55
- Relief of perineal area: 72%
- max. Weight: 110 kg
- Active: Sport (adjustable via 3 elastomeres)
Available Widths (Choose variant)
- 13 cm
- 14 cm
- 15 cm
- 16 cm
Material
- Rails: S-Tube (steel)
- Cover: Interlock
- Padding: Infinergy®
Color
- black
Weight (manufacturer information)
- 13 cm - 268 g
- 14 cm - 276 g
- 15 cm - 280 g
- 16 cm - 308 g
Scope of delivery
- 1 x SQlab 6OX Infinergy Ergowave active 2.1 Saddle
- Incl. Elastomere (Soft, Medium, Hard)
Technologies
The perfect fit for women and men
It‘s not a secret anymore: a saddle must fit like a pair of shoes! Because if a saddle is too narrow, the pressure is applied in spots where it shouldn’t. In 2002 SQlab was the first saddle manufacturer to invent a system to measure the distance between the sit bones and calculate the optimal saddle width. All SQlab saddle models are now available in up to four different widths. This guarantees that the sit bones lie flat on the saddle. This is the only way to relieve the sensitive perineal area in men and the usually deeper positioned pubic arch in women. The new 6OX Infinergy®
ERGOWAVE® active „Made in Germany“ saddle comes in four different widths (13 / 14 / 15 / 16 cm) and therefore offers the optimal fit for men and women alike.
Back-friendly
The SQlab active function, which allows the saddle to easily follow the pedaling motion, becomes softer and smoother. The lateral movement, which increases comfort and is easy on the intervertebral discs, was one of the functions that led to many test victories for SQlab saddles in recent years. The strength of this damping can be adjusted from very soft to almost blocked and adapted to the body weight using the three elastomers included in the scope of delivery. The shell consists of a new plastic/carbon fiber mix and enables the active function via the material flex.
Pressure distribution according to medical aspects
The SQlab Step Saddle shape, which has been tried and tested for twenty years and improved again and again in detail, ensures pressure distribution according to medical aspects - away from the perineal area and towards the sit bones. The saddle nose, which is lower in level, ensures a better pressure distribution at the sit bones and at the ischial branches and therefore presses less strongly on the sensitive structures of the perineal area. For men and women alike. The dip in the middle of the saddle is sufficient to ensure excellent blood and nerve supply.
Perfect hold on the E-MTB
The SQlab saddle shape with the raised seating surface is perfect for uphill riding anyway and brings more power to the pedal even on straight routes.
Quality and comfort
The special feature is the foam of the saddle, which is no longer made of classic PU foam but of the BASF Infinergy® material known from running shoes. This material is very robust, almost indestructible and brings the comfort to a whole new level, especially in off-road use, due to the faster recovery. The cover is not pulled over the entire surface of the saddle as in classic saddles. There are only „tapes“ in the important places.
SQlab active System
4062695001669