The article has been added successfully.
98 more products in this categoryShow more products in this category
Hide suggestions
Shimano XTR BR-M9100 Disc Brake Set
The XTR BR-M9100 hydraulic 2-piston disc brake with 2-finger carbon brake lever from Shimano fits seamlessly into the line-up of the new XTR M9100 component group. Higher braking force with less effort on the fingers and extremely linear response to the lever movement.
The two-piston brake (BR-M9100) comes in combination with a light XC brake lever, whose grip width is of course individually adjustable. The four-piston brake (BR-M9120) recalls its immense potential in combination with a special SERVO-WAVE brake lever (BL-M9120), whose grip width can also be adjusted without tools and which also has an adjustment option for the free travel. Both calipers have a one-piece aluminum design and are combined with highly rigid brake lines, so that the new XTR brake systems score with significantly faster response and less free travel.
The brake pads and brake discs have also been revised to match the newly developed brake calipers. The four-piston brakes use brake pads with cooling fins. (N03/04A, resin/metal). On the other hand, the pads without Kührippen (K02/04S, resin/metal; optionally K02/04Ti with titanium carrier plate) ensure good deceleration with low weight. The design of the brake discs is a further development of the successful ICE TECHNOLOGIES FREEZA design. While the further weight reduction of 5g and 10g is particularly attractive for the 140mm and 160mm discs, the 180mm and 203mm versions are characterised by a further improvement in heat dissipation of 20°C in intensive tests and are also pleasantly low-weight (203mm: minus 30g).
Robust 2-piston disc brake set for XC and marathon racers: Shimano XTR BR-M9100
Starting from a brake system, which was already the benchmark for mountain bike brake systems, the SHIMANO engineers revised the design of the new brake levers (BL-M9100/9120). Both the clamp and the lever body itself have been modified. The clamp moves further into the middle of the lever and is angled. This cleverly supports the outer end of the expansion tank directly on the handlebar and creates an additional abutment when the lever is actuated. This significantly increases stiffness and stability, which ultimately leads to an even more direct braking feel and improved controllability.The two-piston brake (BR-M9100) comes in combination with a light XC brake lever, whose grip width is of course individually adjustable. The four-piston brake (BR-M9120) recalls its immense potential in combination with a special SERVO-WAVE brake lever (BL-M9120), whose grip width can also be adjusted without tools and which also has an adjustment option for the free travel. Both calipers have a one-piece aluminum design and are combined with highly rigid brake lines, so that the new XTR brake systems score with significantly faster response and less free travel.
The brake pads and brake discs have also been revised to match the newly developed brake calipers. The four-piston brakes use brake pads with cooling fins. (N03/04A, resin/metal). On the other hand, the pads without Kührippen (K02/04S, resin/metal; optionally K02/04Ti with titanium carrier plate) ensure good deceleration with low weight. The design of the brake discs is a further development of the successful ICE TECHNOLOGIES FREEZA design. While the further weight reduction of 5g and 10g is particularly attractive for the 140mm and 160mm discs, the 180mm and 203mm versions are characterised by a further improvement in heat dissipation of 20°C in intensive tests and are also pleasantly low-weight (203mm: minus 30g).
Features - Shimano XTR BR-M9100
- Quicker rebound between actions maintains rider concentration
- Greater flexibility and action-optimized cockpit layout
- Update brake lever shape
- Seamless operation
- High rigidity
- High-performance brake control
- High power
- 2-Piston Caliper
- Brake Caliper for Postmount Brake
- New high rigidity brake hose and 1-piece aluminum caliper
- Optimized ergonomic 2-finger brake lever
- One-Way bleeding
- I-Spec EV compatible - securing the shift lever on the brake lever
- RT-MT900 Centerlock rotors in 140, 160, 180, 203mm are available separately!
Product features
- Use: MTB
- Group: XTR M9100
- Model: BR-M9100 (front+rear)
- Brake type: Hydraulic Disc-Brake
- Brake lever: BL-M9100
- Lever length: 2-Finger
- Mount: left + right
- Clamp: open
- Reach adjustment: Yes, with tool
- Caliper: BR-M9100 (2-Piston)
- Brake mounting: Postmount
- Brake pads: K02Ti Resin without Fin
- Brake hose: SM-BH90-SS
- Brake hose lengths: front 1000mm + rear 1700mm (shortable)
- Cable connection: Straight brake lever / Straight caliper
- One-Way bleeding: Yes
- Brake fluid: Mineral oil
- Recommended brake rotor: RT-MT900
Material
- Lever: Carbon
- Caliper: Aluminium
Color
- serial color
Weight
- from approx 312g (kit for front 800mm, w/160mm RT-MT900, w/o adapter, w/2bolts, w/Resin pad)
Scope of delivery
- 2 x Brake lever XTR BL-M9100 left + right
- 2 x Brake caliper XTR BR-M9100 (2-Piston)
- 2 x Brake hose SM-BH90-SS 1000mm + 1700mm long (shortable)
- 2 x Tube Joint Kit
- 2 x Brake pads K02Ti Resin without Fin
- 4 x Screw for brake caliper
- The brake hoses SM-BH90-SS are with mineraloil filled and pre-mountedon the calipers BR-M9100!
Rotors and Adapters not included!
XTR M9100
First ride impression XTR M9100
IM9100JLFPRA100+IM9100JRRXRA170
4059454037373
4059454037373
SHIMANO INC. 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi 590-8577 Osaka Japan https://www.shimano.com
Shimano Europe BV High Tech Campus 92 NL-5656 Eindhoven Netherlands [email protected] https://www.shimano.com
Shimano XTR BR-M9100 Disc Brake Set
The XTR BR-M9100 hydraulic 2-piston disc brake with 2-finger carbon brake lever from Shimano fits seamlessly into the line-up of the new XTR M9100 component group. Higher braking force with less effort on the fingers and extremely linear response to the lever movement.
The two-piston brake (BR-M9100) comes in combination with a light XC brake lever, whose grip width is of course individually adjustable. The four-piston brake (BR-M9120) recalls its immense potential in combination with a special SERVO-WAVE brake lever (BL-M9120), whose grip width can also be adjusted without tools and which also has an adjustment option for the free travel. Both calipers have a one-piece aluminum design and are combined with highly rigid brake lines, so that the new XTR brake systems score with significantly faster response and less free travel.
The brake pads and brake discs have also been revised to match the newly developed brake calipers. The four-piston brakes use brake pads with cooling fins. (N03/04A, resin/metal). On the other hand, the pads without Kührippen (K02/04S, resin/metal; optionally K02/04Ti with titanium carrier plate) ensure good deceleration with low weight. The design of the brake discs is a further development of the successful ICE TECHNOLOGIES FREEZA design. While the further weight reduction of 5g and 10g is particularly attractive for the 140mm and 160mm discs, the 180mm and 203mm versions are characterised by a further improvement in heat dissipation of 20°C in intensive tests and are also pleasantly low-weight (203mm: minus 30g).
Robust 2-piston disc brake set for XC and marathon racers: Shimano XTR BR-M9100
Starting from a brake system, which was already the benchmark for mountain bike brake systems, the SHIMANO engineers revised the design of the new brake levers (BL-M9100/9120). Both the clamp and the lever body itself have been modified. The clamp moves further into the middle of the lever and is angled. This cleverly supports the outer end of the expansion tank directly on the handlebar and creates an additional abutment when the lever is actuated. This significantly increases stiffness and stability, which ultimately leads to an even more direct braking feel and improved controllability.The two-piston brake (BR-M9100) comes in combination with a light XC brake lever, whose grip width is of course individually adjustable. The four-piston brake (BR-M9120) recalls its immense potential in combination with a special SERVO-WAVE brake lever (BL-M9120), whose grip width can also be adjusted without tools and which also has an adjustment option for the free travel. Both calipers have a one-piece aluminum design and are combined with highly rigid brake lines, so that the new XTR brake systems score with significantly faster response and less free travel.
The brake pads and brake discs have also been revised to match the newly developed brake calipers. The four-piston brakes use brake pads with cooling fins. (N03/04A, resin/metal). On the other hand, the pads without Kührippen (K02/04S, resin/metal; optionally K02/04Ti with titanium carrier plate) ensure good deceleration with low weight. The design of the brake discs is a further development of the successful ICE TECHNOLOGIES FREEZA design. While the further weight reduction of 5g and 10g is particularly attractive for the 140mm and 160mm discs, the 180mm and 203mm versions are characterised by a further improvement in heat dissipation of 20°C in intensive tests and are also pleasantly low-weight (203mm: minus 30g).
Features - Shimano XTR BR-M9100
- Quicker rebound between actions maintains rider concentration
- Greater flexibility and action-optimized cockpit layout
- Update brake lever shape
- Seamless operation
- High rigidity
- High-performance brake control
- High power
- 2-Piston Caliper
- Brake Caliper for Postmount Brake
- New high rigidity brake hose and 1-piece aluminum caliper
- Optimized ergonomic 2-finger brake lever
- One-Way bleeding
- I-Spec EV compatible - securing the shift lever on the brake lever
- RT-MT900 Centerlock rotors in 140, 160, 180, 203mm are available separately!
Product features
- Use: MTB
- Group: XTR M9100
- Model: BR-M9100 (front+rear)
- Brake type: Hydraulic Disc-Brake
- Brake lever: BL-M9100
- Lever length: 2-Finger
- Mount: left + right
- Clamp: open
- Reach adjustment: Yes, with tool
- Caliper: BR-M9100 (2-Piston)
- Brake mounting: Postmount
- Brake pads: K02Ti Resin without Fin
- Brake hose: SM-BH90-SS
- Brake hose lengths: front 1000mm + rear 1700mm (shortable)
- Cable connection: Straight brake lever / Straight caliper
- One-Way bleeding: Yes
- Brake fluid: Mineral oil
- Recommended brake rotor: RT-MT900
Material
- Lever: Carbon
- Caliper: Aluminium
Color
- serial color
Weight
- from approx 312g (kit for front 800mm, w/160mm RT-MT900, w/o adapter, w/2bolts, w/Resin pad)
Scope of delivery
- 2 x Brake lever XTR BL-M9100 left + right
- 2 x Brake caliper XTR BR-M9100 (2-Piston)
- 2 x Brake hose SM-BH90-SS 1000mm + 1700mm long (shortable)
- 2 x Tube Joint Kit
- 2 x Brake pads K02Ti Resin without Fin
- 4 x Screw for brake caliper
- The brake hoses SM-BH90-SS are with mineraloil filled and pre-mountedon the calipers BR-M9100!
Rotors and Adapters not included!
XTR M9100
First ride impression XTR M9100
IM9100JLFPRA100+IM9100JRRXRA170
4059454037373
SHIMANO INC.
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi
590-8577 Osaka
Japan
https://www.shimano.com
Shimano Europe BV
High Tech Campus 92
NL-5656 Eindhoven
Netherlands
[email protected] https://www.shimano.com
4059454037373
SHIMANO INC.
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi
590-8577 Osaka
Japan
https://www.shimano.com
Shimano Europe BV
High Tech Campus 92
NL-5656 Eindhoven
Netherlands
[email protected] https://www.shimano.com
Evaluations
(1) rate now
5 Stars 1 (1)
4 Stars _ (0)
3 Stars _ (0)
2 Stars _ (0)
1 Stars _ (0)
To submit a rating, please log in.
We do not check whether the rated item was purchased from us.
Last viewed
Tolle Bremsen. Deutlich bessere Bremskraft als günstigere Shimano Bremsen.