MaXalami Twister 2.0 Tubeless Repair Tool
Product information "Twister 2.0 Tubeless Repair Tool"
The simple construction of this quality product and the large adjustment range guarantee a large number of possible uses. Already in the development phase the Twister 2.0 was used in the hardest MTB races of the world and confirmed its robustness. The difference to the MaXalami Twister of the first generation is the material of the handle. Instead of plastic, 7075 aluminium was used. All in all, the MaXalami Twister 2.0 has a much more robust design and will give the user pleasure for a long time to come.
Features - Twister 2.0 Tubeless Repair Tool
- The tubeless panels can be repaired directly on the trail in seconds and can be removed without the tire
- Black anodized 7075 aluminium and high-quality tool steel make it an eye-catcher on every bike
- The diameter of the rotating wheel, as well as the knurling were also modified for a better function
- The clamping mechanism is made of proven materials
- The MaXalami Twister 2.0 was developed in Germany and also the production is made in Germany
- Suitable for handlebar ends or crankshafts with an inside diameter of 16 - 24 mm
Material
- Tool steel
- 7075 Aluminium
Weight
- 15g
Scope of delivery
- 1 x MaXalami Twister 2.0 Tubeless Repair Tool
- 1 x Adapter elastomer and washer
- 3 x MaXalami tubeless Repair Stripes (10cm)
- Manufacturer number: 242
- EAN: 4260474050383
MaXalami Twister 2.0 Tubeless Repair Tool
The simple construction of this quality product and the large adjustment range guarantee a large number of possible uses. Already in the development phase the Twister 2.0 was used in the hardest MTB races of the world and confirmed its robustness. The difference to the MaXalami Twister of the first generation is the material of the handle. Instead of plastic, 7075 aluminium was used. All in all, the MaXalami Twister 2.0 has a much more robust design and will give the user pleasure for a long time to come.
Features - Twister 2.0 Tubeless Repair Tool
- The tubeless panels can be repaired directly on the trail in seconds and can be removed without the tire
- Black anodized 7075 aluminium and high-quality tool steel make it an eye-catcher on every bike
- The diameter of the rotating wheel, as well as the knurling were also modified for a better function
- The clamping mechanism is made of proven materials
- The MaXalami Twister 2.0 was developed in Germany and also the production is made in Germany
- Suitable for handlebar ends or crankshafts with an inside diameter of 16 - 24 mm
Material
- Tool steel
- 7075 Aluminium
Weight
- 15g
Scope of delivery
- 1 x MaXalami Twister 2.0 Tubeless Repair Tool
- 1 x Adapter elastomer and washer
- 3 x MaXalami tubeless Repair Stripes (10cm)
- Manufacturer number: 242
- EAN: 4260474050383
Ich benutze das Werkzeug ebenfalls in Kompination mit einer GRX FC-RX600 Kurbel. Hierfür habe ich die Hülse ein paar Millimeter gekürzt, damit das Elastomer im vorderen (dünneren) Durchmesser der Achse spannt. Hält bombenfest und lässt sich problemlos montieren und demontieren. Das Werkzeug als solches funktioniert einwandfrei. Der Gabelkopf ist schlank genug gefertigt, dass man problemlos in den Reifen kommt und die Gabelöffnung ist weit genug, um das Werkzeug nach dem Setzen der Wurst zu entfernen, ohne die Wurst wieder raus zu ziehen.
Compatible with a Shimano GRX FC-RX600 crankset but: 1) Maxalami sells it without the "Revolver" support (+9€), so you can't easily pre-load the tool; 2) For my Shimano GRX FC-RX600 : cranckset integration is not so easy as the hole is a bit wider (conic) inside, as you push: you'll have to be patient and screw a bit, then push a bit etc...and reverse the process to take it off. May be hard in winter with cold hands...
Top - immer dabei in der Kurbelachse!
neleCustomerReviews.detail.tabReview.info
Last viewed