more products in this category
Show more products in this category
Cube Hyde Pro Frame black´n´blueThe Hyde Pro frame is a true urban lifestyle bike for riders who appreciate style as much as they do function - for internal gear hub.
Wide range of use: Cube Hyde Pro Frame in black´n´blue for Internal Gear HubThe Hyde Pro's light but stiff aluminium frame - built from a double butted tubeset - is based on our 29er hardtail model. We've tidied up the cable routing by tucking it out of sight inside the down tube, while the chain is tensioned with an eccentric bottom bracket - a maintenance-reducing option that'll be appreciated by your mechanic. It's easy to tackle a puncture yourself, although you should find that this rarely happens with a proper 29in tyre.
Product features - Hyde Pro Frame black´n´blue
- Material: Aluminum Superlite 6061 Urban 29 Double Butted
- Seat post: 27.2mm
- Seat clamp: 31.8mm
- Headtube diameter: Tapered 1 1/8" (ZS 44mm) - 1 1/2" (ZS 56mm) semi-integrated
- Bottom bracket housing: Shimano BSA 68mm
- Disc brake mount rear: IS2000
- Wheel size: 28"
- Dropout: For internal gear hub 135mm
- 2320g (54cm)
Scope of delivery
- Cube Hyde Pro Frame black´n´blue
6061 aluminium alloy requires a heat treatment for the finished product. It is a stiff, very corrosion resistant, fatigue resistant,high-elongation material suitable for light tubesets with high stiffness.
Integrated Cable Routing
Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.
This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.
Wet Paint Surface
On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.
Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased.
Easy Mount Kickstand
The Easy Mount Kick Stand is a new system developed and designed by CUBE. The base of the stand is mounted from below to a fitting plate integrated to the frame and fixed with a through bolt. This kick stand is extremely stiff and solid through the enlarged contact areas between base and frame which gives a stable stand even with loaded panniers.
This elaborate procedure with doubled weld seams has two advantages: On the one hand, it improves the firmness of the weld seams and minimizes the load peaks on the tube welds through energy flow and on the other hand, it helps the frame to a better and more organic look due to the smooth and hardly noticeable welds.
Nina D.Comment:Классная рама под планетарку и широкие колеса. Аккуратные швы и идеальная покраска.Kim V.Comment:Excellent frame to build a internally geared MTB.