- 100ml Brunox Deo for cycle forks
- 100ml Brunox Top Kett
- 100ml Brunox Turbo Spray
100ml Brunox Deo for cycle forks
A little BRUNOX® Deo is sprayed on between submerge- and stand-pipe before and after each tour. Afterwards, spring the fork shortly for several times and you can see suddenly the difference. BRUNOX® Deo keeps the sealing rings in soft condition and does not adhesive dust. Optimal conditions for best performance. BRUNOX® Deo has an excellent penetration ability because of the additive TURBOLINE, keeps the sealing rings smooth, so that you can execute your work even better.
Spray a little BRUNOX® Deo on to the fork pillars before and after each ride and see the significant effect. BRUNOX® Deo keeps the sealing rings flexible whilst resisting dust; ensuring optimal conditions for best performance. BRUNOX® Deo protects seals, adjusting screws, fixings and all pneumatic parts of the forks. A few drops after cleaning will act as a barrier to dirt and ensure long term protection.
100ml Brunox Top Kett
BRUNOX® Top-Kett is suitable for all metal based products in winter storage, storage under humid conditions, storage outdoors, storage indoors up to 3 years.
BRUNOX® Top-Kett is also a high-teclubricant for chains, gears and all moving parts. It has a relatively high viscosity forming an even, non-hardening, compact anti-corrosion- and lubrication-film with 100% coverage especially around edges. It is guaranteed for up to 3-times longer between lubrications.
100ml Brunox Turbo Spray
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
7610567953300
really nice lube for the fork, and the turbo spray i use for the rear mech and the the chain lube i use for the chain :) i really like the kit and would definitely recommend it